Rehab facility
Highlights
Rehab Facility
Effective rehabilitation often requires exercising specific or targeted areas of the body. This could mean that someone purposefully uses one side of their body, left or right for example, in order to retrain and repair damaged muscles and nerve pathways. It is therefore essential for bathroom facilities to adapt, and solutions found that would position equipment in such a way that assists and promotes rehabilitation.
Best results are achieved with flexible bathroom arrangements using Pressalit’s track mounted PLUS products. Supportive items such as hinged arms and shower chairs can be moved left and right on the horizontal wall tack or moved to another area of the bathroom altogether.
A good illustration is the shower, which is usually found in the corner of a bathroom because of drainage. When corners are used, the shower chair will be on one wall and the shower taps and controls adjacent on the other wall. Any transfer on and off the shower seat will be either left or right handed and the use of the taps will be predominantly set up for left or right sided use as well.
Track mounted shower chairs and shower taps can be easily swapped around to provide left or right sided set ups as required, effectively changing the bathroom arrangement to suit individual requirements. Bathroom products that are fixed and do not change position will not provide such an effective solution for rehabilitation.
An opening shower curtain rail should also be included in the arrangement to allow access for ceiling and mobile hoists.
Effective rehabilitation often requires exercising specific or targeted areas of the body. This could mean that someone purposefully uses one side of their body, left or right for example, in order to retrain and repair damaged muscles and nerve pathways. It is therefore essential for bathroom facilities to adapt, and solutions found that would position equipment in such a way that assists and promotes rehabilitation.
Best results are achieved with flexible bathroom arrangements using Pressalit’s track mounted PLUS products. Supportive items such as hinged arms and shower chairs can be moved left and right on the horizontal wall tack or moved to another area of the bathroom altogether.
A good illustration is the shower, which is usually found in the corner of a bathroom because of drainage. When corners are used, the shower chair will be on one wall and the shower taps and controls adjacent on the other wall. Any transfer on and off the shower seat will be either left or right handed and the use of the taps will be predominantly set up for left or right sided use as well.
Track mounted shower chairs and shower taps can be easily swapped around to provide left or right sided set ups as required, effectively changing the bathroom arrangement to suit individual requirements. Bathroom products that are fixed and do not change position will not provide such an effective solution for rehabilitation.
An opening shower curtain rail should also be included in the arrangement to allow access for ceiling and mobile hoists.
Products in this suggestion
21 products included
Specifications for Toilet brush for wall, polished steel
EAN 5708590352640
ETIM EC010555
NRF 6190943
RSK 8714260
UNSPSC 47131608
VVS 778497240
ETIM EC010555
NRF 6190943
RSK 8714260
UNSPSC 47131608
VVS 778497240
Item number
Q10850
Product group
Toilet brush
Product
Toilet brush for wall, polished steel
Product description
Let the Pressalit Choice bathroom accessory series elevate the décor of your bathroom and create coherence with a timeless look. You get a complete range of accessories to suit any bathroom.
Description
Elegant toilet brush for wall mounting. Opens up extra space on the floor.
Materials
Stainless steel AISI 304, mounting knot in brass
Dimensioned drawing, mm
Sales unit
pcs
Weight
0.648 kg
Gross weight
0.648 kg
Weight per crate
1.296 kg
Qty per crate
2
Qty per pallet
0
Cleaning
The product is to be cleaned with hot water or a mild soapy cleaning agent. Do not use chlorine based or corrosive cleaners as it may result in the surface being damaged.
Warranty
A 2-year warranty is provided for material and manufacturing defects.
Subject to changes in the product range, technical changes and printing errors.
PLUS support arm with integrated counter-balance, 850 mm, left hand operated
Product no.: R391385035
Multiple variants
Specifications for PLUS support arm with integrated counter-balance, 850 mm, left hand operated
EAN 5708590368894
ETIM EC010078
FDA ILS/D135866
GMDN 35585
HMI 125890
NRF 6191162
UNSPSC 42211612
ETIM EC010078
FDA ILS/D135866
GMDN 35585
HMI 125890
NRF 6191162
UNSPSC 42211612
Item number
R391385035
Previous version
R3575, RF575
Product group
Support arms and arm supports
Product
PLUS support arm with integrated counter-balance, 850 mm, left hand operated
Product description
All PLUS support arms come with an integrated counter-balance, which ensures a controlled movement between horizontal and vertical positions.
Suitable for use with toilet pans projecting 700 mm or floor standing toilets.
Replaces discontinued models R3575 og RF575.
Suitable for use with toilet pans projecting 700 mm or floor standing toilets.
Replaces discontinued models R3575 og RF575.
Description
PLUS support arm, counter-balanced. Projection 920 mm, ergonomically shaped to provide a clear sense of where the support arm ends. Left hand operated. Height adjustable by 240 mm and sideways adjustable. Detachable and foldable. Anthracite cover plate for vertical wall track.
Materials: The arms are constructed of 10-micrometre anodized aluminium, with a non-slip gripping surface made of soft SEBS incorporating a glass-reinforced nylon core
For fitting to horizontal PLUS wall track (not included).
Materials: The arms are constructed of 10-micrometre anodized aluminium, with a non-slip gripping surface made of soft SEBS incorporating a glass-reinforced nylon core
For fitting to horizontal PLUS wall track (not included).
Mounting instructions
For fitting to horizontal PLUS wall track (not included).
Colour
Red (RAL 3003)
Intended use
The support arm is used as a suport for a user, when he or she sits down or gets up from a toilet.
Expected service life is 10 years, provided that maintenance is carried out as described in the user manual.
Expected service life is 10 years, provided that maintenance is carried out as described in the user manual.
Designer
Rasmus Thygesen
Design year
2011
Materials
The arms are primarily constructed in 10-micrometre anodized aluminium, with a non-slip gripping surface at the end made of soft SEBS and incorporating a glass-reinforced nylon core.
The hinge arm is also made of soft SEBS.
Internal components and fasteners are primarily made of stainless steel.
The hinge barrel is capped with ABS polymer.
The hinge arm is also made of soft SEBS.
Internal components and fasteners are primarily made of stainless steel.
The hinge barrel is capped with ABS polymer.
Ergonomy
The oval shape gives an easy and comfortable surface to lean and push against.
The end of the support arm is enlarged so that it is easier to pull forward from a sitting position and also provides a clear sense of where the support arm ends.
Soft and slip-resistant material that has a warm feel.
The end of the support arm is enlarged so that it is easier to pull forward from a sitting position and also provides a clear sense of where the support arm ends.
Soft and slip-resistant material that has a warm feel.
Features
Folds against the wall.
The underside is shaped for the mounting of various accessories.
The underside is shaped for the mounting of various accessories.
Product capacity
Maximum load: 150 kg.
When the support arm is loaded with 150 kg, each wall fastener in the horizontal wall track is loaded with 44 kg.
PLUS support arms have been tested statically with 700 kg (close to the wall), 425 kg (in the middle) and 225 kg (the outermost point).
When the support arm is loaded with 150 kg, each wall fastener in the horizontal wall track is loaded with 44 kg.
PLUS support arms have been tested statically with 700 kg (close to the wall), 425 kg (in the middle) and 225 kg (the outermost point).
Dimensioned drawing, mm
Adjustability
Height and sideways adjustable
Adjustment height
240 mm
Maximum user weight (MUM)
150 kg
Safe working load (SWL)
150 kg
Sales unit
pcs
Weight
5.23 kg
Carton size
1060x245x275 mm
Gross weight
6.916 kg
Weight per crate
6.916 kg
Crates per pallet
16
Qty per crate
1
Qty per pallet
16
Cleaning
PLUS support arms.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+
NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.
Declaration of conformity
CE MDR This product is in compliance with all relevant requirements of: - Regulation (EU) 2017/745 on medical devices.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Intended use
The support arm is used as a support for sitting down or getting up from a toilet, or for sideways transfer from a wheelchair.
Operating environment
For indoor use in a wet environment, such as a bathroom or a washroom, in private homes, nursing homes and hospitals.
For institutional use, the expected life time is 10 years.
Life cycle test performed according to ISO 17966:2016.
For maintenance, please refer to user guide, which is enclosed with the product, and which can also be found on the website under "Downloads".
Specifications for PLUS wall track, 1800 mm
EAN 5708590305813
ETIM EC010050
HMI 71743
NRF 7501017
VVS 615841118
ETIM EC010050
HMI 71743
NRF 7501017
VVS 615841118
Item number
R9818112
Previous version
R9905
Product group
Wall tracks
Product
PLUS wall track, 1800 mm
Product description
PLUS wall tracks are used for mounting of support arms, shower seats and wash basin brackets, and allows sideways adjustment of these products.
See below a selection of products for fitting to the wall track.
See below a selection of products for fitting to the wall track.
Description
PLUS wall track, 1800 mm, for horizontal mounting.
The cover plate hides bolts and wires and facilitates cleaning.
Materials: Aluminium and polystyrene.
See below a selection of products for fitting to the wall track.
Excl. mounting kit.
The cover plate hides bolts and wires and facilitates cleaning.
Materials: Aluminium and polystyrene.
See below a selection of products for fitting to the wall track.
Excl. mounting kit.
Colour
Anthracite grey
Designer
Rasmus Thygesen
Design year
2011
Materials
The wall track is primarily made of 10-micrometre anodized aluminium. The cover plate is made of polystyrene and the ends of the track are capped with ABS polymer.
Ergonomy
The track distributes the weight of the individual bathroom product, for example a wash basin bracket, along its entire length. The products can be adjusted and locked on to the track with intuitive locking functions.
Features
The horizontal track makes it possible to shift the product along the wall to constantly optimize the available space in the bathroom. The front cover plate conceals mounting bolts and any cables.
Product capacity
Maximum load: Up to 1000 kg depending on the wall type.
Dimensioned drawing, mm
Adjustability
Fixed mounting
Sales unit
pcs
Weight
4.392 kg
Gross weight
4.8714 kg
Weight per crate
4.8714 kg
Crates per pallet
56
Qty per crate
1
Qty per pallet
56
Cleaning
PLUS wall tracks.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+
NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.
Declaration of conformity
MDR-ACC This product fulfils all relevant requirements in Regulation (EU) 2017/745 on medical devices in risk class I. This product is considered to be an accessory for a medical device, as it is not itself a medical device, but is intended to be used together with several particular medical devices to specifically enable the medical devices to be used in accordance with their intended purposes.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for Shower mixer bracket
EAN 5708590314723
ETIM EC004580
HMI 88814
NBS N13:40,375
NRF 6311293
VVS 615859760
ETIM EC004580
HMI 88814
NBS N13:40,375
NRF 6311293
VVS 615859760
Item number
RT760
Product group
Shower accessories
Product
Shower mixer bracket
Product description
Pressalit offers a selection of bath and toilet accessories developed especially for mounting on different PLUS products
Description
Shower mixer bracket, incl. 1200 mm feed pipes.
With locking handle.
Sideways adjustable on PLUS walltrack for easy access anywhere in the bathroom
With locking handle.
Sideways adjustable on PLUS walltrack for easy access anywhere in the bathroom
Materials
Aluminium, plastics, steel-braided hoses
Ergonomy
The moveable shower mixer bracket makes it possible to position the hand shower and mixer tap as required.
Features
Outside the shower zone, the unit can be used beside the wash basin for washing hair or at the toilet as a bidet function.
Dimensioned drawing, mm
Sales unit
pcs
Weight
3.28 kg
Gross weight
3.62 kg
Weight per crate
3.62 kg
Qty per crate
1
Qty per pallet
0
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
MATRIX MEDIUM wash basin with overflow, for powered basin unit
Product no.: R2122000
Multiple variants
Specifications for MATRIX MEDIUM wash basin with overflow, for powered basin unit
EAN 5708590349404
ETIM EC011550
HMI 105903
NRF 6132439
UNSPSC 30181504
VVS 639863100
ETIM EC011550
HMI 105903
NRF 6132439
UNSPSC 30181504
VVS 639863100
Item number
R2122000
Product group
Wash basins
Product
MATRIX MEDIUM wash basin with overflow, for powered basin unit
Product description
MATRIX is a series of wash basins, most of them are designed by Pressalit.
MATRIX SMALL and CURVE wash basins fit onto PLUS, SELECT and VALUE wash basin brackets, whereas MATRIX MEDIUM, ANGLE, ANGLE DEEP and SQUARE are tailor made to fit specific brackets.
MATRIX SMALL and CURVE wash basins fit onto PLUS, SELECT and VALUE wash basin brackets, whereas MATRIX MEDIUM, ANGLE, ANGLE DEEP and SQUARE are tailor made to fit specific brackets.
Description
MATRIX MEDIUM vanity wash basin, 780 x 550 x 165 mm, with two integrated handrails in the front, and operating buttons in the front edge. With tap hole Ø36 mm and overflow.
Drain fitting must be bought separately.
The wash basin has raised edges, preventing water from running over the back or down the outer sides.
Materials: Cultured marble with a high-polished, pore-free sanitary gel coating.
Suitable for mounting on MATRIX powered basin unit R4822 (UK R4827).
Drain fitting must be bought separately.
The wash basin has raised edges, preventing water from running over the back or down the outer sides.
Materials: Cultured marble with a high-polished, pore-free sanitary gel coating.
Suitable for mounting on MATRIX powered basin unit R4822 (UK R4827).
Mounting instructions
Mounting material for this wash basin is included with the bracket/lifter.
Colour
White
Materials
Cultured marble with a high-polished, pore-free sanitary gel coating.
Product capacity
180 kg.
Dimensioned drawing, mm
Sales unit
pcs
Weight
27 kg
Gross weight
29.7 kg
Weight per crate
29.7 kg
Crates per pallet
5
Qty per crate
1
Qty per pallet
5
Cleaning
For cleaning the wash basin, use hot water and a mild soapy cleaning agent. Make sure that the product is wiped down with a soft rag wrung out in clear water immediately after cleaning.
For disinfecting the wash basin, the following agents can be used:
Sodium hydroxide 5%
Acetic acid solution 10%
Ethanol solution 70%
Sodium hypochlorite 5%, active chlorine
Sodium chloride 170g/l, diluted to 50%.
Make sure that the product is wiped down with a soft rag wrung out in clear water immediately after disinfection.
NB! Do not use abrasive cleaning agents, as this will cause damage to the surface of the wash basin.
For disinfecting the wash basin, the following agents can be used:
Sodium hydroxide 5%
Acetic acid solution 10%
Ethanol solution 70%
Sodium hypochlorite 5%, active chlorine
Sodium chloride 170g/l, diluted to 50%.
Make sure that the product is wiped down with a soft rag wrung out in clear water immediately after disinfection.
NB! Do not use abrasive cleaning agents, as this will cause damage to the surface of the wash basin.
Declaration of conformity
Declaration of Performance
Compliance criteria according to EN 14688:2015.
4.1 Load resistance: stable, without cracks or deformations.
4.2 Draining of water: Water drained away completely.
4.3 Resistance to temperature changes: Without cracks, delaminations.
4.4 Resistance to chemicals and staining agents:
- Sodium hydroxide 5% - without staining or deterioration;
- Acetic acid solution 10% - without staining or deterioration;
- Ethanol sol. 70% - without staining or deterioration;
- Sodium hypochlorite 5% active chlorine - without staining or deterioration;
- Sodium chloride 170g/l diluted to 50% - without staining or deterioration.
4.5 Surface stability / resistance to scratching: Do not use abrasives on the surface.
4.6 Cleanability: Smooth, non-absorbant surfaces.
4.7 Protection against overflowing: CL 10.
4.8 Durability: Product is considered durable.
Compliance criteria according to EN 14688:2015.
4.1 Load resistance: stable, without cracks or deformations.
4.2 Draining of water: Water drained away completely.
4.3 Resistance to temperature changes: Without cracks, delaminations.
4.4 Resistance to chemicals and staining agents:
- Sodium hydroxide 5% - without staining or deterioration;
- Acetic acid solution 10% - without staining or deterioration;
- Ethanol sol. 70% - without staining or deterioration;
- Sodium hypochlorite 5% active chlorine - without staining or deterioration;
- Sodium chloride 170g/l diluted to 50% - without staining or deterioration.
4.5 Surface stability / resistance to scratching: Do not use abrasives on the surface.
4.6 Cleanability: Smooth, non-absorbant surfaces.
4.7 Protection against overflowing: CL 10.
4.8 Durability: Product is considered durable.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
PLUS support arm with integrated counter-balance, 850 mm, right hand operated
Product no.: R391485035
Multiple variants
Specifications for PLUS support arm with integrated counter-balance, 850 mm, right hand operated
EAN 5708590369013
ETIM EC010078
FDA ILS/D135866
GMDN 35585
HMI 123656
NRF 6191173
UNSPSC 42211612
ETIM EC010078
FDA ILS/D135866
GMDN 35585
HMI 123656
NRF 6191173
UNSPSC 42211612
Item number
R391485035
Previous version
R3585, RF585, R3548, RF548
Product group
Support arms and arm supports
Product
PLUS support arm with integrated counter-balance, 850 mm, right hand operated
Product description
All PLUS support arms come with an integrated counter-balance, which ensures a controlled movement between horizontal and vertical positions.
Suitable for use with toilet pans projecting 700 mm or floor standing toilets.
Replaces discontinued models R3585 og RF585.
Suitable for use with toilet pans projecting 700 mm or floor standing toilets.
Replaces discontinued models R3585 og RF585.
Description
PLUS support arm, counter-balanced. Projection 920 mm, ergonomically shaped to provide a clear sense of where the support arm ends. Right hand operated. Height adjustable by 240 mm and sideways adjustable. Detachable and foldable. Anthracite cover plate for vertical wall track.
Materials: The arms are constructed of 10-micrometre anodized aluminium, with a non-slip gripping surface made of soft SEBS incorporating a glass-reinforced nylon core
For fitting to horizontal PLUS wall track (not included).
Materials: The arms are constructed of 10-micrometre anodized aluminium, with a non-slip gripping surface made of soft SEBS incorporating a glass-reinforced nylon core
For fitting to horizontal PLUS wall track (not included).
Mounting instructions
For fitting to horizontal PLUS wall track (not included).
Colour
Red (RAL 3003)
Intended use
The support arm is used as a suport for a user, when he or she sits down or gets up from a toilet.
Expected service life is 10 years, provided that maintenance is carried out as described in the user manual.
Expected service life is 10 years, provided that maintenance is carried out as described in the user manual.
Designer
Rasmus Thygesen
Design year
2011
Materials
The arms are primarily constructed in 10-micrometre anodized aluminium, with a non-slip gripping surface at the end made of soft SEBS and incorporating a glass-reinforced nylon core.
The hinge arm is also made of soft SEBS.
Internal components and fasteners are primarily made of stainless steel.
The hinge barrel is capped with ABS polymer.
The hinge arm is also made of soft SEBS.
Internal components and fasteners are primarily made of stainless steel.
The hinge barrel is capped with ABS polymer.
Ergonomy
The oval shape gives an easy and comfortable surface to lean and push against.
The end of the support arm is enlarged so that it is easier to pull forward from a sitting position and also provides a clear sense of where the support arm ends.
Soft and slip-resistant material that has a warm feel.
The end of the support arm is enlarged so that it is easier to pull forward from a sitting position and also provides a clear sense of where the support arm ends.
Soft and slip-resistant material that has a warm feel.
Features
Folds against the wall.
The underside is shaped for the mounting of various accessories.
The underside is shaped for the mounting of various accessories.
Product capacity
Maximum load: 150 kg.
When the support arm is loaded with 150 kg, each wall fastener in the horizontal wall track is loaded with 44 kg.
PLUS support arms have been tested statically with 700 kg (close to the wall), 425 kg (in the middle) and 225 kg (the outermost point).
When the support arm is loaded with 150 kg, each wall fastener in the horizontal wall track is loaded with 44 kg.
PLUS support arms have been tested statically with 700 kg (close to the wall), 425 kg (in the middle) and 225 kg (the outermost point).
Dimensioned drawing, mm
Adjustability
Height and sideways adjustable
Adjustment height
240 mm
Maximum user weight (MUM)
150 kg
Safe working load (SWL)
150 kg
Sales unit
pcs
Weight
5.23 kg
Carton size
1060x245x275 mm
Gross weight
6.916 kg
Weight per crate
6.916 kg
Crates per pallet
16
Qty per crate
1
Qty per pallet
16
Cleaning
PLUS support arms.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+
NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.
Declaration of conformity
CE MDR This product is in compliance with all relevant requirements of: - Regulation (EU) 2017/745 on medical devices.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Intended use
The support arm is used as a support for sitting down or getting up from a toilet, or for sideways transfer from a wheelchair.
Operating environment
For indoor use in a wet environment, such as a bathroom or a washroom, in private homes, nursing homes and hospitals.
For institutional use, the expected life time is 10 years.
Life cycle test performed according to ISO 17966:2016.
For maintenance, please refer to user guide, which is enclosed with the product, and which can also be found on the website under "Downloads".
SCT 3000 shower change table, electrically height adjustable
Product no.: R8582318301
Multiple variants
Specifications for SCT 3000 shower change table, electrically height adjustable
EAN 5708590374123
ETIM EC010457
GMDN 43600
HMI 130164
UNSPSC 42211601
VVS 777543493
ETIM EC010457
GMDN 43600
HMI 130164
UNSPSC 42211601
VVS 777543493
Item number
R8582318301
Previous version
R8518, R8538
Product group
SCT 3000 series
Product
SCT 3000 shower change table, electrically height adjustable
Product description
Pressalit offers a variety of mobile and wall-hung, height-adjustable and fixed height shower and changing tables of high quality. They are designed to provide a stable platform for showering and changing adults and children with reduced mobility.
These tables can be used in schools, institutions, hospitals and private homes and are all designed to be durable, comfortable and easy to clean.
The design and flexibility of the tables ensures optimal working conditions for the carer as well as a high level of comfort and safety for the user.
The SCT 3000 series has a stylish and award-winning design focused on comfort and ease of use.
These tables can be used in schools, institutions, hospitals and private homes and are all designed to be durable, comfortable and easy to clean.
The design and flexibility of the tables ensures optimal working conditions for the carer as well as a high level of comfort and safety for the user.
The SCT 3000 series has a stylish and award-winning design focused on comfort and ease of use.
Description
SCT 3000 shower change table, powered, height adjustable 700 mm; from 300 mm -1000 mm, with wired hand control
Foldable. Incl. safety rail, flexible hose (Ø32 mm) and water collection tray with integrated outlet.
Surface length 1800 mm, outer measurements 1057 mm x 1910 mm.
Materials: Powder-lacquered stainless steel, aluminium, polyurethane foam and polystyrene.
Excl. mounting kit.
Foldable. Incl. safety rail, flexible hose (Ø32 mm) and water collection tray with integrated outlet.
Surface length 1800 mm, outer measurements 1057 mm x 1910 mm.
Materials: Powder-lacquered stainless steel, aluminium, polyurethane foam and polystyrene.
Excl. mounting kit.
Mounting instructions
Excl. mounting kit. See Technical datasheet (pdf) for information on mounting kits suitable for various wall types.
Colour
Graphite grey (RAL 7024)
Intended use
This product is intended for showering or changing a person who is unable to stand or sit. The person is lying horizontally on the table.
Expected service life is 10 years for institutional use, provided that maintenance is carried out as described in the user manual.
Expected service life is 10 years for institutional use, provided that maintenance is carried out as described in the user manual.
Designer
Rasmus Thygesen
Design year
2020
Materials
Aluminium, polyurethane foam, plastics, powder-laquered steel.
Ergonomy
• The ergonomically designed safety rails have a practical lower central section, which provides better access and work environment for the carer while transferring, showering, drying, changing and dressing the user.
• One hand operated safety rails allows the carer to maintain eye contact as well as physical contact with the user during the whole process.
• Easy to clean, smooth contact surfaces which do not collect dirt and bacteria.
• One hand operated safety rails allows the carer to maintain eye contact as well as physical contact with the user during the whole process.
• Easy to clean, smooth contact surfaces which do not collect dirt and bacteria.
Features
• A water collection tray with integrated water outlet prevents water from splashing on carers or the floor. The flexible hose (Ø32 mm) attached to the center mounted outlet of the water collection tray, can be connected to either an outlet in the floor or on the wall.
• The slightly curved shape makes the table comfortable and safe to lie on.
• Adjustable neck support which can be moved to either end of the 1800 mm shower and changing tables.
• The integrated gas cylinders enable the table to be folded out of the way when not in use to maximize floor space.
• The powered shower change table is supplied with a wired hand control. The red buttons clearly indicate "up" and "down".
• The wired hand control comes with a practical holder for placement on the wall.
• The slightly curved shape makes the table comfortable and safe to lie on.
• Adjustable neck support which can be moved to either end of the 1800 mm shower and changing tables.
• The integrated gas cylinders enable the table to be folded out of the way when not in use to maximize floor space.
• The powered shower change table is supplied with a wired hand control. The red buttons clearly indicate "up" and "down".
• The wired hand control comes with a practical holder for placement on the wall.
Product capacity
Maximum user weight (MUM): 200 kg.
Safe working load (SWL): 210 kg.
When the table is loaded with 200 kg, each mounting bolt supports 26 kg
This product has been tested statically with a load of 525 kg as the IEC 60601-1 standard requires testing with safety factor 2.5.
Safe working load (SWL): 210 kg.
When the table is loaded with 200 kg, each mounting bolt supports 26 kg
This product has been tested statically with a load of 525 kg as the IEC 60601-1 standard requires testing with safety factor 2.5.
Dimensioned drawing, mm
Adjustability
Height adjustable
Adjustment height
700 mm
Mains connection (V)
230 V
Hz
50/60 Hz
IP
IPX6
Power consumption (maximum load)
390 W
Power consumption (standby)
2 W
Speed upwards
15 mm/s
Speed, downwards
20 mm/s
Noise level
48 dB
Actuator (motor)
LA40CS Careline (Linak) 4000 N, IPX6
Control box
SMPS14 Careline (Linak), IPX6
Wired remote control
HB3 (Linak), IPX6
Maximum user weight (MUM)
200 kg
Safe working load (SWL)
210 kg
Sales unit
pcs
Weight
77.6 kg
Gross weight
83.6 kg
Weight per crate
83.6 kg
Crates per pallet
2
Qty per crate
1
Qty per pallet
2
Cleaning
SCT 3000.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+
Clinell Universal Wipes
Clinel Sporidical Wipes
Chlor-Clean Tablets
WipeClean Ethanol Disinfection 80%
Wetwipe Ethanol Disinfection 70% (wetwipe)
NON-DISINFECTANTS:
Wetwipe Universal
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.
Declaration of conformity
CE UK MDR-MASK-RoHS This product is in compliance with all relevant requirements of:
- Regulation (EU) 2017/745 on medical devices
- Council Directive 2006/42/EC on machinery
- Council Directive 2011/65/EC on RoHS. For the UK:
- Medical Device Regulation (MDR) 2002 on medical devices.
- Supply of Machinery (Safety) Regulations 2008
- Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.
- Regulation (EU) 2017/745 on medical devices
- Council Directive 2006/42/EC on machinery
- Council Directive 2011/65/EC on RoHS. For the UK:
- Medical Device Regulation (MDR) 2002 on medical devices.
- Supply of Machinery (Safety) Regulations 2008
- Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.
WEEE
Please enquire of your local Pressalit subsidiary or distributor (in countries where there is no subsidiary) that will arrange for recycling of electronic waste in accordance with the WEEE directive.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of three years from the invoicing date. NOTICE If the product is placed in an atmosphere heavy in salt or chloride, the warranty will be reduced from the normal 3 years to 1 year. Salt and chloride have a corrosive effect on the products components and will cause a decrease in the life expectancy of the product.
Specifications for Modular shelves for fixed mounting, 600 mm rod
EAN 5708590154213
ETIM EC011163
HMI 124133
NBS N13:449
NRF 7501028
RSK 7973956
VVS 777559200
ETIM EC011163
HMI 124133
NBS N13:449
NRF 7501028
RSK 7973956
VVS 777559200
Item number
RT491000
Expires date
31/12/2023
Product group
Storage and accessories
Product
Modular shelves for fixed mounting, 600 mm rod
Product description
PLUS modular shelves are practical shelves attached to a pole, they are available for fitting to PLUS wall tracks or PLUS wash basin brackets, as well as for wall-mounting.
Description
Modular shelf system: 600 mm, for fixed mounting on wall, incl. two shelves 400 mm, towel rail and two trays.
Incl. mounting kit for brick wall.
Incl. mounting kit for brick wall.
Colour
White
Materials
Aluminium.
Stainless steel.
Laminate.
Stainless steel.
Laminate.
Features
The shelves and towel rail are height adjustable.
Product capacity
Maximum load: 12 kg.
Load per shelf: 4 kg.
Load on towel holder: 4 kg.
Load per shelf: 4 kg.
Load on towel holder: 4 kg.
Dimensioned drawing, mm
Adjustability
Fixed mounting
Sales unit
pcs
Weight
3.44 kg
Gross weight
4.04 kg
Weight per crate
4.04 kg
Crates per pallet
15
Qty per crate
1
Qty per pallet
15
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for Toilet seat Dania without cover
EAN 5708590315904
ETIM EC011526
HMI 108576
NBS N13:300
NRF 6191064
UNSPSC 42211614
VVS 615678035
ETIM EC011526
HMI 108576
NBS N13:300
NRF 6191064
UNSPSC 42211614
VVS 615678035
Item number
R27035-D92999
Product group
Toilet seats
Product
Toilet seat Dania without cover
Product description
Toilet seat, Dania, with stabilising buffers, without cover, incl. extra strong cross bar hinge with 100 mm bolt.
Description
Toilet seat, Dania, with stabilising buffers, without cover, incl. extra strong cross bar hinge with 100 mm bolt.
Colour
Red (RAL 3003)
Materials
Seat: Thermoset plastic (urea)
Strap: Stainless steel V2A
Strap: Stainless steel V2A
Ergonomy
An ergonomically designed seat that is well suited to most people. Sideways transfer is easy because the seat is rather flat.
Product capacity
This product has been tested statically up to 375 kg. As the European standard for technical aids for disabled, BS/EN 12182:2012, requires a static test with safety factor 1.5, the nominal maximum load for this product is therefore 250 kg.
Dimensioned drawing, mm
Hinge model
D92
Hinge drawing
Mounting
Bottom mounted
Sales unit
pcs
Weight
2.257 kg
Carton size
457x389x68 mm
Gross weight
2.657 kg
Weight per crate
13.285 kg
Crates per pallet
18
Qty per crate
5
Qty per pallet
90
Cleaning
Use a mild soap solution to clean the toilet seat. Please take care that the seat and hinges are not left damp. For disinfecting the seat, e.g. ethanol 85% can be used. Make sure that the product is wiped down with a soft rag wrung out in clear water and dried off with a soft, dry cloth immediately after disinfection.
Avoid contact of the seat and hinges with abrasive, corrosive or chlorine-based cleaners, as these may cause damage or lead to flash rust. Therefore, when cleaning the bowl, make sure that the seat and cover are kept in an upright position until all cleaning agent has been flushed away.
Avoid contact of the seat and hinges with abrasive, corrosive or chlorine-based cleaners, as these may cause damage or lead to flash rust. Therefore, when cleaning the bowl, make sure that the seat and cover are kept in an upright position until all cleaning agent has been flushed away.
Warranty
Your Pressalit toilet seat is subject to a 10-year product warranty against presentation of receipt. You should contact the dealer or store where you purchased the seat in the event of a complaint.
In the event of complaints about defective materials and/or manufacturing defects and/or functional limitations ascertained within a 10-year period, following proper use and cleaning of the toilet seat (we reserve the right to examine the toilet seat at our factory), Pressalit will deliver spare parts or replace the toilet seat by an identical or similar model. If the color is no longer available, Pressalit reserves its right to replace the toilet seat by a similar model in the color white. Upon replacement or delivery of a spare part, the warranty period will not be extended nor renewed. If replacement is not possible, Pressalit may instead refund the purchase price.
In the event of complaints about defective materials and/or manufacturing defects and/or functional limitations ascertained within a 10-year period, following proper use and cleaning of the toilet seat (we reserve the right to examine the toilet seat at our factory), Pressalit will deliver spare parts or replace the toilet seat by an identical or similar model. If the color is no longer available, Pressalit reserves its right to replace the toilet seat by a similar model in the color white. Upon replacement or delivery of a spare part, the warranty period will not be extended nor renewed. If replacement is not possible, Pressalit may instead refund the purchase price.
Subject to changes in the product range, technical changes and printing errors.
Product fits
Manufacturer
Bowl
IFÖ Sanitär AB
Sign
Spira
Cera væghængt
Spira
Cera væghængt
Laufen AG
Pro-N
Gustavsberg (V & B)
Nautic
Saval Pro
Saval Pro
Keramag AG (Geberit)
Renova Nr. 1
Villeroy & Boch
O.novo Vita
O.Novo rimfree
Omnia Classic
O.Novo rimfree
Omnia Classic
LAUFEN CZ s. r. o.
Deep by Jika New
Geberit International AG
Renova Nr. 1
Grohe A/S
Bau Ceramic
VITRA
Matrix
Pressalit A/S
O.Novo ny skyllekant
Pressalit R2099
Pressalit R2099
Specifications for PLUS shower head holder
EAN 5708590169972
ETIM EC010132
HMI 42227
NBS N13:40,375
VVS 777564735
ETIM EC010132
HMI 42227
NBS N13:40,375
VVS 777564735
Item number
RT600035
Product group
Shower accessories
Product
PLUS shower head holder
Product description
Shower head holder recommended with hand rails RT118/119, RT136/138 or RT144.
Description
Shower head holder recommended with hand rails RT118/119, RT136/138 eller RT144.
Mounting instructions
Mounting material included.
Colour
Red (RAL 3003)
Materials
Polycarnonate (PC) and ABS plastic
Ergonomy
Easy height adjustment with one hand or hands with little strength.
Features
For mounting on handrails with a diameter of 33 mm.
Dimensioned drawing, mm
Sales unit
pcs
Weight
0.12 kg
Gross weight
0.2 kg
Weight per crate
0.2 kg
Crates per pallet
125
Qty per crate
1
Qty per pallet
125
Cleaning
The product is to be cleaned with hot water or a mild soapy cleaning agent. Do not use chlorine based or corrosive cleaners as it may result in the surface being damaged.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for Shower head with normal jet
EAN 5708590346823
ETIM EC010161
HMI 42225
VVS 738525540
ETIM EC010161
HMI 42225
VVS 738525540
Item number
RT612
Product group
Shower accessories
Product
Shower head with normal jet
Product description
Shower head with normal jet, with 2000 mm hose
Description
Shower head with normal jet, with 2000 mm hose, chrome-look plastics
Materials
Plastic
Ergonomy
The curved shape of the handle and the weight balance between head and handle makes the shower head suitable for hands with little strength.
Dimensioned drawing, mm
Sales unit
pcs
Weight
0.205 kg
Gross weight
0.311 kg
Weight per crate
0.311 kg
Crates per pallet
100
Qty per crate
1
Qty per pallet
100
Cleaning
The product is to be cleaned with hot water or a mild soapy cleaning agent. Do not use chlorine based or corrosive cleaners as it may result in the surface being damaged.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for Shower curtain 1800 mm x 2000 mm, 2 pcs
EAN 5708590170084
ETIM EC010492
HMI 42203
NBS N13:375
NRF 6311241
VVS 777471510
ETIM EC010492
HMI 42203
NBS N13:375
NRF 6311241
VVS 777471510
Item number
RT205000
Product group
Shower accessories
Product
Shower curtain 1800 mm x 2000 mm, 2 pcs
Product description
Shower curtain, 1800 mm x 2000 mm, 2 singles
Description
Shower curtain, 1800 mm x 2000 mm, 2 singles
Colour
White
Materials
Polyester cloth with zinc metal eyelet nickelfree and rust free at top, with PE reinforcement lining inside, rubber band at bottom curtain.
Sales unit
pcs
Weight
0.932 kg
Gross weight
1.038 kg
Weight per crate
1.038 kg
Crates per pallet
100
Qty per crate
1
Qty per pallet
100
Cleaning
The product is to be cleaned with hot water or a mild soapy cleaning agent. Do not use chlorine based or corrosive cleaners as it may result in the surface being damaged.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for Mirror 600 x 1000 mm with mirror fittings
EAN 5708590237442
ETIM EC010550
NBS N13:438
NRF 7501044
RSK 7972513
UNSPSC 52171002
VVS 777553001
ETIM EC010550
NBS N13:438
NRF 7501044
RSK 7972513
UNSPSC 52171002
VVS 777553001
Item number
RT924
Product group
Mirror and mirror holder
Product
Mirror 600 x 1000 mm with mirror fittings
Product description
Mirror 600 x 1000 mm x 5 mm, including 4 mirror fittings
Incl. mounting kit for brick wall.
Incl. mounting kit for brick wall.
Description
Mirror 600 x 1000 mm x 5 mm, including 4 mirror fittings
Incl. mounting kit for brick wall.
Incl. mounting kit for brick wall.
Materials
Mirror: Glass
Mirror fittings:
Basic material: Brass
Surface material: 912 matt chrome
Mirror fittings:
Basic material: Brass
Surface material: 912 matt chrome
Dimensioned drawing, mm
Sales unit
pcs
Weight
7.744 kg
Gross weight
9.344 kg
Weight per crate
9.344 kg
Crates per pallet
20
Qty per crate
1
Qty per pallet
20
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for Paper holder for PLUS support arm
EAN 5708590314679
ETIM EC010553
HMI 71813
NBS N13:436
NRF 6190665
UNSPSC 30181610
VVS 615859100
ETIM EC010553
HMI 71813
NBS N13:436
NRF 6190665
UNSPSC 30181610
VVS 615859100
Item number
R9321
Product group
Support arms and arm supports
Product
Paper holder for PLUS support arm
Product description
Paper holder, for mounting to underside of PLUS support arm.
Description
Paper holder, for mounting to underside of PLUS support arm.
Mounting instructions
Mounting material included.
Materials
Aluminium
Dimensioned drawing, mm
Sales unit
pcs
Weight
0.254 kg
Gross weight
0.26 kg
Weight per crate
0.26 kg
Qty per crate
1
Qty per pallet
0
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Safety lock for SCT 1000, 2000 and 3000 shower change tables
Product no.: R8485
Multiple variants
Specifications for Safety lock for SCT 1000, 2000 and 3000 shower change tables
EAN 5708590352329
ETIM EC010092
VVS 777545982
ETIM EC010092
VVS 777545982
Item number
R8485
Product group
Accessories for shower and changing tables
Product
Safety lock for SCT 1000, 2000 and 3000 shower change tables
Product description
The safety lock holds the shower table securely folded against the wall.
Description
Safety lock, 250 mm, wall-mounted, for SCT 1000, 2000 and 3000 shower change tables.
Dimensioned drawing, mm
Adjustability
Fixed mounting
Sales unit
pcs
Weight
0.28 kg
Gross weight
0.403 kg
Weight per crate
0.403 kg
Crates per pallet
50
Qty per crate
1
Qty per pallet
50
PLUS shower seat 450, manually height and manually sideways adjustable
Product no.: R7464035
Multiple variants
Specifications for PLUS shower seat 450, manually height and manually sideways adjustable
EAN 5708590360027
ETIM EC010872
FDA INN/D135865
GMDN 34936
HMI 124233
NRF 6317138
UNSPSC 42211610
ETIM EC010872
FDA INN/D135865
GMDN 34936
HMI 124233
NRF 6317138
UNSPSC 42211610
Item number
R7464035
Previous version
R7450, R7566
Product group
Shower seats
Product
PLUS shower seat 450, manually height and manually sideways adjustable
Product description
PLUS shower seats are offered in a number of colours. They are available as both fixed height, electrically adjustable and manually adjustable, with and without aperture, and with an option of back and armrests.
They are suitable for wall-mounting or for fitting to Pressalit PLUS wall tracks.
They are suitable for wall-mounting or for fitting to Pressalit PLUS wall tracks.
Description
PLUS shower seat 450, with back- and armrests. Manually height adjustable by 195 mm and sideways adjustable, without the use of tools. Armrests are independently height adjustable. The seat and the armrests are foldable.
Materials: Comfortable polyurethane foam over a plywood core, fitted to an aluminium profile. The non-slip gripping surface of the armrests are made of soft SEBS.
For fitting to horizontal PLUS wall track (not included).
Materials: Comfortable polyurethane foam over a plywood core, fitted to an aluminium profile. The non-slip gripping surface of the armrests are made of soft SEBS.
For fitting to horizontal PLUS wall track (not included).
Mounting instructions
For fitting to horizontal PLUS wall track (not included).
Colour
Red (RAL 3003)
Intended use
The shower seat is used to sit on during showering.
Expected service life of the shower seat is 10 years, provided that maintenance is carried out as described in the instructions for use (OMM).
Expected service life of the shower seat is 10 years, provided that maintenance is carried out as described in the instructions for use (OMM).
Designer
Rasmus Thygesen
Design year
2011
Materials
The shower seat is made of polyurethane (PU) foam with a plywood core and this is covered with an in-mould coated surface that is protected using a clear PU lacquer. The backrest is made of polyurethane (PU) foam protected using a clear PU lacquer. The arms are primarily constructed of 10-micrometre anodized aluminium, with a non-slip gripping surface at the end made of soft SEBS and inforporating a glass-reinforced nylon core. The hinge arm is also made of soft SEBS. Internal components and fasteners are primarily made of stainless steel. The hinge barrel is capped with ABS.
Ergonomy
Ergonomically designed seat - contact surface are 450 x 437 mm. Soft and slip-resistant material that has a warm feel. The oval shape of the armrests gives an easy and comfortable surface to lean on and push against.
Features
The seat, backrest and armrests can be adjusted simultaneously thanks to a safe and easy click system. The armrests can also be adjusted independently of the seat and backrest. The seat and armrests can fold up when not in use or to maximise floor space.
Product capacity
Maximum user mass (seat): 200 kg.
Maximum load for armrests is 55 kg.
When the seat is loaded with 200 kg, each wall fastener is loaded with 23 kg.
The seat has been tested statically with safety factor 1.5, which is a requirement according to the applied assistive products standards.
Maximum load for armrests is 55 kg.
When the seat is loaded with 200 kg, each wall fastener is loaded with 23 kg.
The seat has been tested statically with safety factor 1.5, which is a requirement according to the applied assistive products standards.
Dimensioned drawing, mm
Adjustability
Height and sideways adjustable
Adjustment height
195 mm
Maximum user weight (MUM)
200 kg
Safe working load (SWL)
200 kg
Sales unit
pcs
Weight
19.28 kg
Gross weight
21.42 kg
Weight per crate
21.42 kg
Crates per pallet
3
Qty per crate
1
Qty per pallet
3
Cleaning
PLUS shower seat.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
Important: Polyurethane surfaces of PLUS shower seats and PLUS backrests contains an antibacterial surface, which will be compromised if cleaned with anything other than soap and water.
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.
Declaration of conformity
CE MDR This product is in compliance with all relevant requirements of: - Regulation (EU) 2017/745 on medical devices.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for Drain fitting, ring, chain and plug
EAN 5708590352596
ETIM EC003867
NRF 6132454
ETIM EC003867
NRF 6132454
Item number
LA1319
Product group
Wash basins
Product
Drain fitting, ring, chain and plug
Product description
Drain fitting, ring, chain and plug, for MATRIX M
Description
Drain fitting, ring, chain and plug, R2120/21/22/23
Dimensioned drawing, mm
Sales unit
pcs
Weight
0.13 kg
Gross weight
0.209 kg
Weight per crate
0.209 kg
Qty per crate
1
Qty per pallet
0
Specifications for PLUS handrail 1000 mm
EAN 5708590145952
ETIM EC011028
GMDN 35586
HMI 19085
NBS N13:436
NRF 6317169
UNSPSC 42211608
VVS 777565535
ETIM EC011028
GMDN 35586
HMI 19085
NBS N13:436
NRF 6317169
UNSPSC 42211608
VVS 777565535
Item number
RT104035
Product group
Handrails
Product
PLUS handrail 1000 mm
Product description
PLUS handrails are high-quality products and they can be combined in countless ways and they provide the final touch to furnishing a functional and flexible bathroom. A reliable solution with many different options, which can easily lay the grounds for increased independence.
Description
PLUS handrail, diameter 33 mm, length 1000 mm, for fixed mounting.
The projection of 50 mm from the wall makes it easy to take hold of the rail.
Inkl. wall rosette, which covers the fixings.
Material: Powder-coated aluminium and plastic
Excl. mounting kit.
The projection of 50 mm from the wall makes it easy to take hold of the rail.
Inkl. wall rosette, which covers the fixings.
Material: Powder-coated aluminium and plastic
Excl. mounting kit.
Mounting instructions
Excl. mounting kit. See Technical datasheet (pdf) for information on mounting kits suitable for various wall types.
Colour
Red (RAL 3003)
Intended use
PLUS hand rail solutions are intended as a support for walking and standing users in the bathroom or for assisting seated users who need help getting up.
Expected service life is 10 years.
Expected service life is 10 years.
Materials
Basic material: Aluminium
Surface material: Polyester lacquer
Cover cap: Cycoloy plastic
Surface material: Polyester lacquer
Cover cap: Cycoloy plastic
Ergonomy
The 33 mm diameter enables the rail to be held comfortably and firmly. The projection of 50 mm from the wall makes it easy to take hold of the rail.
Product capacity
Maximum load: 235 kg.
When the handrail is loaded with 235 kg, each wall fastener is loaded with 56 kg.
Handrails are tested with a 1.5 safety factor in accordance with the requirements in ISO 17966:2016.
When the handrail is loaded with 235 kg, each wall fastener is loaded with 56 kg.
Handrails are tested with a 1.5 safety factor in accordance with the requirements in ISO 17966:2016.
Dimensioned drawing, mm
Sales unit
pcs
Weight
1.466 kg
Gross weight
1.818 kg
Weight per crate
1.818 kg
Crates per pallet
48
Qty per crate
1
Qty per pallet
48
Cleaning
Handrails ALU.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+
NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.
Declaration of conformity
CE UK MDR This product is in compliance with all relevant requirements of:
- Regulation (EU) 2017/745 on medical devices.
For the UK: - Medical Device Regulation (MDR) 2002 on medical devices.
- Regulation (EU) 2017/745 on medical devices.
For the UK: - Medical Device Regulation (MDR) 2002 on medical devices.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Shower curtain rail, opening version, 1530 x 1530 mm
Product no.: RT225
Multiple variants
Specifications for Shower curtain rail, opening version, 1530 x 1530 mm
EAN 5708590208015
ETIM EC011493
HMI 32309
NBS N13:375
NRF 6311244
VVS 777271400
ETIM EC011493
HMI 32309
NBS N13:375
NRF 6311244
VVS 777271400
Item number
RT225
Product group
Shower accessories
Product
Shower curtain rail, opening version, 1530 x 1530 mm
Product description
Shower curtain rail - opening version,1530 x 1530 mm, incl. 2 x 12 curtain rings, anodized aluminium.
Ideal for a room with a ceiling hoist.
Excl. mounting kit.
Ideal for a room with a ceiling hoist.
Excl. mounting kit.
Description
Shower curtain rail - opening version,1530 x 1530 mm, incl. 2 x 12 curtain rings, anodized aluminium.
Ideal for a room with a ceiling hoist.
Excl. mounting kit.
Ideal for a room with a ceiling hoist.
Excl. mounting kit.
Materials
Basic material: 20 micrometre anodized aluminium
Connectors/rings: Polyoxymethylene plastic (POM)
Connectors/rings: Polyoxymethylene plastic (POM)
Dimensioned drawing, mm
Sales unit
pcs
Weight
5.459 kg
Gross weight
6.397 kg
Weight per crate
6.397 kg
Crates per pallet
55
Qty per crate
1
Qty per pallet
55
Cleaning
The product is to be cleaned with hot water or a mild soapy cleaning agent. Do not use chlorine based or corrosive cleaners as it may result in the surface being damaged.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Shower mixer with thermostat and black operating levers easy to handle
Product no.: RT640
Multiple variants
Specifications for Shower mixer with thermostat and black operating levers easy to handle
EAN 5708590211824
ETIM EC011329
HMI 35288
NBS N13:40,375
NRF 6311291
RSK 8344043
UNSPSC 30181702
VVS 719015604
ETIM EC011329
HMI 35288
NBS N13:40,375
NRF 6311291
RSK 8344043
UNSPSC 30181702
VVS 719015604
Item number
RT640
Product group
Shower accessories
Product
Shower mixer with thermostat and black operating levers easy to handle
Product description
Shower mixer with thermostat and black operating levers easy to handle.
VA-approved (Denmark).
VA-approved (Denmark).
Description
Shower mixer with thermostat and black operating levers easy to handle.
VA-approved (Denmark).
VA-approved (Denmark).
Materials
Basic material: brass
Protective cover: plastic
Handles: plastic
Protective cover: plastic
Handles: plastic
Ergonomy
Design and contrasting colour of the operating handles make the "wing-shaped" handles easy to see and to use.
Features
The shower mixer is heat insulated.
Can be mounted at shower mixer bracket RT760.
Can be mounted at shower mixer bracket RT760.
Dimensioned drawing, mm
Sales unit
pcs
Weight
1.73 kg
Gross weight
1.888 kg
Weight per crate
1.888 kg
Crates per pallet
100
Qty per crate
1
Qty per pallet
100
Cleaning
The product is to be cleaned with hot water or a mild soapy cleaning agent. Do not use chlorine based or corrosive cleaners as it may result in the surface being damaged.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for PLUS wall track, 2100 mm
EAN 5708590305837
ETIM EC010050
HMI 71744
NRF 7501018
VVS 615841121
ETIM EC010050
HMI 71744
NRF 7501018
VVS 615841121
Item number
R9821112
Previous version
R9906
Product group
Wall tracks
Product
PLUS wall track, 2100 mm
Product description
PLUS wall tracks are used for mounting of support arms, shower seats and wash basin brackets, and allows sideways adjustment of these products.
See below a selection of products for fitting to the wall track.
See below a selection of products for fitting to the wall track.
Description
PLUS wall track, 2100 mm, for horizontal mounting.
The cover plate hides bolts and wires and facilitates cleaning.
Materials: Aluminium and polystyrene.
See below a selection of products for fitting to the wall track.
Excl. mounting kit.
The cover plate hides bolts and wires and facilitates cleaning.
Materials: Aluminium and polystyrene.
See below a selection of products for fitting to the wall track.
Excl. mounting kit.
Colour
Anthracite grey
Designer
Rasmus Thygesen
Design year
2011
Materials
The wall track is primarily made of 10-micrometre anodized aluminium. The cover plate is made of polystyrene and the ends of the track are capped with ABS polymer.
Ergonomy
The track distributes the weight of the individual bathroom product, for example a wash basin bracket, along its entire length. The products can be adjusted and locked on to the track with intuitive locking functions.
Features
The horizontal track makes it possible to shift the product along the wall to constantly optimize the available space in the bathroom. The front cover plate conceals mounting bolts and any cables.
Product capacity
Maximum load: Up to 1000 kg depending on the wall type.
Dimensioned drawing, mm
Adjustability
Fixed mounting
Sales unit
pcs
Weight
5.124 kg
Gross weight
5.6697 kg
Weight per crate
5.6697 kg
Crates per pallet
56
Qty per crate
1
Qty per pallet
56
Cleaning
PLUS wall tracks.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+
NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.
Declaration of conformity
MDR-ACC This product fulfils all relevant requirements in Regulation (EU) 2017/745 on medical devices in risk class I. This product is considered to be an accessory for a medical device, as it is not itself a medical device, but is intended to be used together with several particular medical devices to specifically enable the medical devices to be used in accordance with their intended purposes.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Pressalit A/S
Pressalitvej 1
DK-8680 Ry
Danmark
T +45 8788 8788
E pressalit@pressalit.com
