VALUE IV folding shower seat with supporting leg, fixed height
Product number: R1622000112
EAN: 5708590377728
Previous versions: R1602
The seat is foldable
White frame, anthracite gray seat
Description
- Product description
- Space efficient
- With and without front support leg
- 650 projection for good side transfers
- VALUE lV folding shower seat and backrest create a simple solution for users who need to sit down while showering.
Incl. mounting bolts for brick wall. Plugs depend on wall type and must be ordered separately.VALUE IV shower seat. Fixed height. The seat is foldable.
Materials: Diecast aluminium, Rilsan-coated stainless steel and vacuum-moulded polyethylene (PE).
Incl. mounting bolts for brick wall. Plugs depend on wall type and must be ordered separately.
- Intended use
- The shower seat is used to sit on during showering.
Expected service life of the shower seat is 10 years, provided that maintenance is carried out as described in the instructions for use (OMM). - Features
- The seat can fold up when not in use or to create more space.
Leg for extra support. - Ergonomy
- Ergonomic seat with a comfortable surface.
- ProductAttributes.ProductIntendedUse
- SHOWER SEATS
- Product capacity
- Maximum user mass: 298 lbs.
When the seat is loaded with 298 lbs, each wall fastener is loaded with 276 lbs.
The seat has been tested statically with safety factor 1.5, which is a requirement according to the applied assistive products standards. - Warranty
- Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications
- Product codes
EAN
5708590377728VVS
777525412DB
2510921ETIM
EC010872NRF
6314098RSK
8162782HMI
124486GMDN
34936FDA
INN/D135865UNSPSC
42211610
- Previous version
- R1602
- Product group
- Shower seats
- Dimensioned drawing, inch
- Adjustability
- Fixed mounting
- Maximum user weight (MUM), lbs
- 298
- Declaration of conformity
- This product is produced in compliance with all relevant requirements of:
- Regulation (EU) 2017/745 on medical devices (Risk class I, rule 1) - Colour
- Anthracite gray
- Materials
- The wall profile is made of diecast aluminium, and the frame and the leg is made of Rilsan-coated stainless steel. Rilsan provides good protection against corrosion and is comfortable to touch and easy to clean.The seat is made of vacuum-moulded polyethylene (PE).
- Cleaning
This product should be cleaned with hot water or a mild cleaning solution.
Do not use corrosive or abrasive cleaners as it may result in the surface being damaged.
For surface disinfection, chlorine-based disinfectants may be used according to the product specification and safety precautions for these products.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+
Sprit (husholdningssprit)
Suma Bac D10
Virkon
Rodalon Desinfektionsspray
Lysoformin Spezial
CaviCide
Sufanios Premium
Tvättsprit 70%
WipeClean UniversalCleaning
Chrolorine Disinfection Wipes
Klorilli (Kiilto Clean)
NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200
Milizid Citro
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.- Sales unit
- pcs
- Net weight, lbs
- 21.8
- Gross weight, lbs
- 24.9
- Weight per crate, lbs
- 24.9
- Crates per pallet
- 12
- Qty per crate
- 1
- Qty per pallet
- 12
Mounting
- Mounting
- Incl. mounting bolts for brick wall. Plugs depend on wall type and must be ordered separately.