Mattress

Accessory for a medical device

The mattress is easily removed, which offers flexibility of use and ensures optimum opportunity for effective cleaning over and under the mattress..

The mattress scan be turned over and is made from a pleasant hypoallergenic material with a surface that is easy to wipe down and keep clean.

ACCESSORY MDR

This product is produced in compliance with all relevant requirements of:
- Regulation (EU) 2017/745 on medical devices (Risk class I, rule 1)
This product is considered to be an accessory for a medical device, as it is not itself a medical device, but is intended to be used together with several particular medical devices to specifically enable the medical devices to be used in accordance with their intended purposes.

The mattress cover is manufactured from 100% polyester with polyurethane, approved in accordance with Oeko-Tex 100, Class I. It is fire retardant and impermeable to dust mites. The foam filling is flexible polyester-based polyurethane foam, which is also fire retardant and approved in accordance with Oeko-tex 100, Class I.

This product should be cleaned with hot water or a mild cleaning solution.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

DISINFECTANTS:
Sprit (husholdningssprit)
Tvättsprit 70%
Safe Zone Plus
Selgiene Extreme
Accel PREVention Wipes Lingettes
OxiGenesis from ENVIROX

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.