Toilet seat Dania with cover, 50 mm raised

Toilet seat Dania with cover, 50 mm raised
Toilet seat Dania with cover, 50 mm raised
Toilet seat Dania with cover, 50 mm raised
With stabilising buffers and special hinges adapted to raised toilet seat. Incl. splash guard.
{{ productPrice.unitPrice.displayValue }}
(Taxes may apply)
Something went wrong



With cover


With splash guard

Product no.: R43000 - EAN: 5708590186696
Inexpensive adaptation to toilet which changes height

Toilet seat Dania with cover, 50 mm raised


EAN 5708590186696
DB 2296032
ETIM EC011526
HMI 88826
NBS N13:300
NRF 6191645
UNSPSC 42211614
VVS 615697000
Item number
Product group
Toilet seats
Toilet seat Dania with cover, 50 mm raised
Product description
Toilet seat, Dania, with stabilising buffers, w/cover, raised 50 mm, incl. splashguard. With raised cross bar hinge
Toilet seat, Dania, with stabilising buffers, w/cover, raised 50 mm, incl. splashguard
With raised cross bar hinge
Seat/cover: Thermoset plastic (urea)

Strap: Stainless steel V2A

Raiser: Nylon (PA)

Special buffer: ABS-plastic

An ergonomically designed seat that is well suited to most people. Sideways transfer is easy because the seat is rather flat. The cover is comfortable to sit on, and when set upright it gives good support to the back.

Raised 5 cm to make it less difficult to sit down and stand up.

Product capacity
This product has been tested statically up to 225 kg. As the European standard for technical aids for disabled, BS/EN 12182:2012, requires a static test with safety factor 1.5, the nominal maximum load for this product is therefore 150 kg.
Dimensioned drawing, mm
Hinge model
Hinge drawing
Sales unit
4.4 kg
Gross weight
4.7 kg
Weight per crate
4.7 kg
Qty per crate
Qty per pallet
Use a mild soap solution to clean the toilet seat. Please take care that the seat and hinges are not left damp. For disinfecting the seat, e.g. ethanol 85% can be used. Make sure that the product is wiped down with a soft rag wrung out in clear water and dried off with a soft, dry cloth immediately after disinfection.
Avoid contact of the seat and hinges with abrasive, corrosive or chlorine-based cleaners, as these may cause damage or lead to flash rust. Therefore, when cleaning the bowl, make sure that the seat and cover are kept in an upright position until all cleaning agent has been flushed away.
Your Pressalit toilet seat is subject to a 10-year product warranty against presentation of receipt. You should contact the dealer or store where you purchased the seat in the event of a complaint.

In the event of complaints about defective materials and/or manufacturing defects and/or functional limitations ascertained within a 10-year period, following proper use and cleaning of the toilet seat (we reserve the right to examine the toilet seat at our factory), Pressalit will deliver spare parts or replace the toilet seat by an identical or similar model. If the color is no longer available, Pressalit reserves its right to replace the toilet seat by a similar model in the color white. Upon replacement or delivery of a spare part, the warranty period will not be extended nor renewed. If replacement is not possible, Pressalit may instead refund the purchase price.
Subject to changes in the product range, technical changes and printing errors.
Product fits
IFÖ Sanitär AB
Spira, høj , lukket S-lås, rimfree
Cera væghængt
Gustavsberg (V & B)
Saval Pro
Villeroy & Boch
O.novo Vita
O.Novo rimfree
Omnia Classic
Grohe A/S
Bau Ceramic
Laufen AG
Pressalit A/S
O.Novo ny skyllekant
Sparepart drawing