PLUS replacement shower seat 450 with aperture, manually height adjustable

Name: PLUS replacement shower seat 450 with aperture, manually height adjustable
Brand: Pressalit
Availability: InStock

Product number: R7115000

EAN: 5708590358970

Previous versions: R7401, R9701

Can be height adjusted 240 mm.
For fitting to vertical PLUS wall track (not included)

PLUS replacement shower seat 450 with aperture, manually height adjustable

Product number: R7115000

EAN: 5708590358970

Previous versions: R7401, R9701

Can be height adjusted 240 mm.
For fitting to vertical PLUS wall track (not included)

Description

Product description

- Allows retro fitting of product
- Movable and sharable in different locations without the use of tools
- Range of colours, sizes and combinations of seat, backrest and arms
PLUS shower seats are offered in a number of colours. They are available as both fixed height, electrically adjustable and manually adjustable, with and without aperture, and with an option of back and armrests.
They are suitable for wall-mounting or for fitting to Pressalit PLUS wall tracks.
PLUS shower seat 450 with aperture, Manually height adjustable by 240 mm, without the use of tools. The seat is foldable.
Materials: Comfortable polyurethane foam over a plywood core, fitted to an aluminium profile.
For fitting to vertical PLUS wall track (not included).
Replaces R7401

Intended use

The shower seat is used to sit on during showering.
Expected service life of the shower seat is 10 years, provided that maintenance is carried out as described in the instructions for use (OMM).

Features

The seat can fold up when not in use or to maximise floor space.

Ergonomy

Ergonomically designed seat - contact surface are 450 x 437 mm. Soft and slip-resistant material that has a warm feel.

ProductAttributes.ProductIntendedUse

SHOWER SEATS

Product capacity

Maximum user mass: 200 kg.
When the seat is loaded with 200 kg, each wall fastener is loaded with 47 kg.

The seat has been tested statically with safety factor 1.5, which is a requirement according to the applied assistive products standards.

Warranty

Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.

Specifications

Product codes

EAN
5708590358970
VVS
777514200
ETIM
EC010872
NRF
6317066
GMDN
34936
FDA
INN/D135865
UNSPSC
42211610

Previous version

R7401, R9701

Product group

Shower seats

Dimensioned drawing, mm

Adjustability

Height adjustable

Adjustment height, mm

240

Maximum user weight (MUM), kg

200

Declaration of conformity

This product is produced in compliance with all relevant requirements of:
- Regulation (EU) 2017/745 on medical devices (Risk class I, rule 1)

Colour

White

Designer

Rasmus Thygesen

Design year

2011

Materials

The shower seat is made of polyurethane (PU) foam with a plywood core and this is covered with an in-mould coated surface that is protected using a clear PU lacquer. Internal components and fasteners are primarily made of stainless steel. The hinge barrel is capped with ABS.

Cleaning

PLUS shower seat
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

DISINFECTANTS:
Erisan OXY+
Tvättsprit 70%
CaviCide surface disinfectant decontaminant cleaner
Rodalon Desinfektionsspray
Terralin protect (SCHÜLKE+)
Dismonzon Plus (BODE Chemie GmbH)

NON-DISINFECTANTS:
Wetrok Caledor (Wetrok)
Petrosol Citro (Büfa)

Important: Polyurethane surfaces of PLUS shower seats and PLUS backrests contains an antibacterial surface, which will be compromised if cleaned with anything other than soap and water.

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.

Sales unit

pcs

Net weight, kg

8.5

Gross weight, kg

10.3

Weight per crate, kg

10.3

Crates per pallet

Qty per crate

Qty per pallet

Mounting

Mounting: For fitting to vertical PLUS wall track (not included).