PLUS wall track, 94.5"

PLUS wall track, 94.5"
For horizontal mounting
{{ productPrice.unitPrice.displayValue }}
(Taxes may apply)
Something went wrong
Product no.: R9824112 - GTIN-13: 5708590305851
Previous version: R9907
Track allows movement of products - push within reach or out of the way for different user situations Space efficient - products can be moved into dead space Elimination for need to adapt bathroom to different user requirements - future proof arrangement

PLUS wall track, 94.5"PLUS wall track, 94.5"

Specifications

ProductCodes
GTIN-13 5708590305851
ETIM EC010050
HMI 71745
NRF 7501019
VVS 615841124
EAN 5708590305851
Item number
R9824112
Previous version
R9907
Product group
Wall tracks
Product
PLUS wall track, 94.5"
Product description
PLUS wall tracks are used for mounting of support arms, shower seats and sink brackets, and allows sideways adjustment of these products.
See below a selection of products for fitting to the wall track.
Description
PLUS wall track, 94.5", for horizontal mounting.
The cover plate hides bolts, wires and simplifies cleaning.
Materials: Aluminium and polystyrene.
Excl. mounting kit.
Color
Anthracite gray
Designer
Rasmus Thygesen
Design year
2011
Materials
The wall track is primarily made of 10-micrometer anodized aluminium. The cover plate is made of polystyrene and the ends of the track are capped with ABS polymer.
Ergonomy
The track distributes the weight of the individual bathroom product, for example a sink bracket, along its entire length. The products can be adjusted and locked on to the track with intuitive locking functions.
Features
The horizontal track makes it possible to shift the product along the wall to generate extra space as needed. The front cover plate conceals mounting bolts and any cables.
Product capacity
Maximum load: Up to 2200 lbs. depending on the wall type.
Dimensioned drawing, inch
Adjustability
Fixed mounting
Sales unit
pcs
Weight
12.91 lbs
Gross weight
14.26 lbs
Weight per crate
14.26 lbs
Crates per pallet
56
Qty per crate
1
Qty per pallet
56
Cleaning

This product should be cleaned with hot water or a mild cleaning solution.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

DISINFECTANTS:
CaviCide

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that water deposits (Calcium, lime etc.) be removed from wall tracks and other aluminum parts using a solution of three parts of 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts should be wiped over with a damp cloth wrung out in plain water.

Declaration of conformity
This product fulfils all relevant requirements in European Regulation (EU) 2017/745 on medical devices in risk class I. This product is considered to be an accessory for a medical device, as it is not itself a medical device, but is intended to be used together with several particular medical devices to specifically enable the medical devices to be used in accordance with their intended purposes.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.