Specifications

ProductCodes

GTIN-13 5708590305936
ETIM EC010050
HMI 71750
NRF 7501067
VVS 615841136
EAN 5708590305936

Item number

R9836112

Previous version

R9911

Product group

Wall tracks

Product

PLUS wall track, 141.7''

Product description

PLUS wall tracks are used for mounting of support arms, shower seats and sink brackets, and allows sideways adjustment of these products.
See below a selection of products for fitting to the wall track.

Description

PLUS wall track, 141.7", for horizontal mounting.
The cover plate hides bolts, wires and simplifies cleaning.
Materials: Aluminium and polystyrene.
Excl. mounting kit.

Color

Anthracite gray

Designer

Rasmus Thygesen

Design year

2011

Ergonomy

The track distributes the weight of the individual bathroom product, for example a sink bracket, along its entire length. The products can be adjusted and locked on to the track with intuitive locking functions.

Features

The horizontal track makes it possible to shift the product along the wall to generate extra space as needed. The front cover plate conceals mounting bolts and any cables.

Dimensioned drawing, inch

Adjustability

Fixed mounting

Sales unit

pcs

Weight

19.37 lbs

Gross weight

21.3 lbs

Weight per crate

21.3 lbs

Qty per crate

1

Qty per pallet

0

Cleaning

This product should be cleaned with hot water or a mild cleaning solution.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

DISINFECTANTS:
CaviCide

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that water deposits (Calcium, lime etc.) be removed from wall tracks and other aluminum parts using a solution of three parts of 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts should be wiped over with a damp cloth wrung out in plain water.

Declaration of conformity

This product fulfils all relevant requirements in European Regulation (EU) 2017/745 on medical devices in risk class I. This product is considered to be an accessory for a medical device, as it is not itself a medical device, but is intended to be used together with several particular medical devices to specifically enable the medical devices to be used in accordance with their intended purposes.

Warranty

Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.