PLUS backrest, fixed height

PLUS backrest, fixed height
7.2" x 11.5".
Distance from wall: 4.2".
{{ productPrice.unitPrice.displayValue }}
Taxes may apply
Something went wrong
Product no.: R6304000 - GTIN-13: 5708590365282
Previous version: R6310, R6010
Ergonomic Comfortable Range of colours

PLUS backrest, fixed heightPLUS backrest, fixed height


GTIN-13 5708590365282
ETIM EC010948
GMDN 31062
HMI 124221
NRF 6317025
VVS 777538100
EAN 5708590365282
Item number
Previous version
R6310, R6010
Product group
Front supports and backrests
PLUS backrest, fixed height
Product description
PLUS backrests are offered in a number of colours and versions, they are available as both fixed height and adjustable.
They are suitable for wall-mounting behind a toilet without cistern or mounting on one of Pressalit’s toilet lifters.
PLUS backrest, 11.5'' x 7.5'', soft feel.
Fixed height, for mounting directly on the wall behind a wall-mounted toilet without cistern.
Materials: Aluminium and polyurethane foam with a plywood core.
Incl. mounting bolts for brick wall. Plugs depend on wall type and must be ordered separately.
Mounting instructions
Incl. mounting bolts for brick wall. Plugs depend on wall type and must be ordered separately.
Intended use
Backrests are intended to be mounted behind a toilet without cistern to ensure support for an unstable person.
Expected service life is 10 years.
The backrest is made of polyurethane (PU) foam which is covered with a moulded coated surface that is protected using a clear PU lacquer.
Soft and slip-resistant material that has a warm feel.
For toilet without cistern
Product capacity
Maximum load: 110 lbs.
Maximum user weight: 220 lbs.
When the backrest is loaded with 110 lbs, each wall fastener will be carrying 130 lbs.
Backrests need to be able to support the weight of the person who is leaning against it.
The backrest is not intended to carry the full body weight of a person, and the test methods applicable to backrests reflect this: ISO 17966 prescribes a static test at 50% of maximum user weight, i.e. when the maximum load on a wash basin bracket is given as 110 lbs, it is – according to ISO 17966 – the equivalent of a user weighing 220 lbs leaning on the backrest.

Dimensioned drawing, inch
Fixed mounting
Maximum user weight (MUM)
220 lbs
Maximum load (SWL)
110 lbs
Sales unit
3.72 lbs
Gross weight
4.32 lbs
Weight per crate
4.32 lbs
Crates per pallet
Qty per crate
Qty per pallet

This product should be cleaned with hot water or a mild cleaning solution.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.


The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

Pressalit recommends that water deposits (Calcium, lime etc.) be removed from wall tracks and other aluminum parts using a solution of three parts of 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts should be wiped over with a damp cloth wrung out in plain water.

Declaration of conformity
This product is in compliance with all relevant requirements of regulation (EU) 2017/745 on medical devices.
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.