Lift for worktop, electrically height adjustable
For worktop length 2001 - 2400 mm
Multiple adjustment methods - crank handle and powered Intuitive controls that can be operated independently Height adjustment range assist variety of different user requirements
For worktops from 2001 - 2400 mm.
Height adjustable 300 mm.
Including 2 telescopic legs, brackets, longitudinal and cross bracesand switch.
Pressalit Care recommends overhang of 400 mm at either end of worktop to allow for ease of approach in wheel-chair.
Please state desired length when ordering.
Expected service life for the INDIVO lifting units is
Telescopic leg: Aluminium, ABS plastic
Cross braces: Aluminium
Cable tray: ABS plastic
Switches: ABS plastic
Brackets: Powder lacquered (grey RAL 9006)
The height of the worktop can be quickly and easily adjusted to the given user or situation.
A freestanding worktop can also be used in rooms in which the walls are not strong enough to support the wall-mounted models.
Operating switches can be placed anywhere.
The design of the legs and feet make the table stable and secure, and ensure the lift causes minimal inconvenience to wheelchair users.
The design of the lift makes it possible to use the worktop from all sides.
Height adjustable over a range of 300 mm.
Available for worktops of any length between 1400 mm and 3000 mm.
100 kg including worktop.
INDIVO lift for kitchen worktop.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
Suma Star free D1
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.