PLUS shower seat 450, fixed height

PLUS shower seat 450, fixed height
PLUS shower seat 450, fixed height
PLUS shower seat 450, fixed height
PLUS shower seat 450, fixed height
The seat is foldable.
{{ productPrice.unitPrice.displayValue }}
(Taxes may apply)
Something went wrong
Product no.: R7404000 - EAN: 5708590359465
Previous version: R7408
Space efficient Ergonomic seat, in soft non slip material Range of colours and sizes

PLUS shower seat 450, fixed heightPLUS shower seat 450, fixed height


Product codes
EAN 5708590359465
ETIM EC010872
FDA INN/D135865
GMDN 34936
HMI 124480
NRF 6317101
UNSPSC 42211610
VVS 777514100
Item number
Previous version
Product group
Shower seats
PLUS shower seat 450, fixed height
Product description
PLUS shower seats are offered in a number of colours. They are available as both fixed height, electrically adjustable and manually adjustable, with and without aperture, and with an option of back and armrests.
They are suitable for wall-mounting or for fitting to Pressalit PLUS wall tracks.
PLUS shower seat 450. For fixed mounting. The seat is foldable.
Materials: Comfortable polyurethane foam over a plywood core, fitted to an aluminium profile.
Excl. mounting kit.
Mounting instructions
Excl. mounting kit. See Technical datasheet (pdf) for information on mounting kits suitable for various wall types.
Intended use
The shower seat is used to sit on during showering.
Expected service life of the shower seat is 10 years, provided that maintenance is carried out as described in the instructions for use (OMM).
Rasmus Thygesen
Design year
The shower seat is made of polyurethane (PU) foam with a plywood core and this is covered with an in-mould coated surface that is protected using a clear PU lacquer. Internal components and fasteners are primarily made of stainless steel. The hinge barrel is capped with ABS.
Ergonomically designed seat - contact surface are 450 x 437 mm. Soft and slip-resistant material that has a warm feel.
The seat can fold up when not in use or to maximise floor space.
Product capacity
Maximum user mass: 200 kg.
When the seat is loaded with 200 kg, each wall fastener is loaded with 113 kg.

The seat has been tested statically with safety factor 1.5, which is a requirement according to the applied assistive products standards.

Dimensioned drawing, mm
Fixed mounting
Maximum user weight (MUM)
200 kg
Safe working load (SWL)
200 kg
Sales unit
7.6 kg
Gross weight
10 kg
Weight per crate
10 kg
Crates per pallet
Qty per crate
Qty per pallet

PLUS shower seat.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

Erisan OXY+
Tvättsprit 70%
CaviCide surface disinfectant decontaminant cleaner
Rodalon Desinfektionsspray
Terralin protect (SCHÜLKE+)
Dismonzon Plus (BODE Chemie GmbH)

Wetrok Caledor (Wetrok)
Petrosol Citro (Büfa)

Important: Polyurethane surfaces of PLUS shower seats and PLUS backrests contains an antibacterial surface, which will be compromised if cleaned with anything other than soap and water.

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.
Declaration of conformity
CE MDR This product is in compliance with all relevant requirements of: - Regulation (EU) 2017/745 on medical devices.
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.