SELECT TL2 toilet lifter, for floor outlet

Product no.: R8312112 · EAN: 5708590341521

Electrically height adjustable 400 mm (425-825 mm) with wired remote control.

Different heights to suit different users/transfer techniques Manual or powered adjustment to suit different requirements - frequent/periodic adjustment Allows a range of support arms, back rests and WC's to be fitted for a bespoke solution

SELECT TL2 toilet lifter, for floor outlet
SELECT TL2 toilet lifter, for floor outlet


SELECT TL2 toilet lifter, for floor outletSELECT TL2 toilet lifter, for floor outletSELECT TL2 toilet lifter, for floor outlet


EAN 5708590341521
ETIM EC010062
GMDN 63055
HMI 105974
NRF 6191028
VVS 617996412
Item number
Product group
Toilet lifters
SELECT TL2 toilet lifter, for floor outlet
Product description
The aim is to make it as easy as possible for users to get on and off the toilet during daily use. The aim is also to make the carer’s work easier, and make the process comfortable and dignified for the user.
SELECT TL2 toilet lifter, 400 mm electrically height adjustable with wired hand control.
Incl. cistern with dual flushing system preset at 3/6 litres.
Toilet pan and toilet seat to be ordered separately.
The integral vertical side profiles allow for addition of PLUS support arms.
For floor-outlet.
Materials: Anodised aluminium and polystyrene (PS).
Excl. fixing kit.
Mounting instructions
Excl. fixing kit. See Technical datasheet (pdf) for information on fixings suitable for various wall types.
Anthracite grey
Intended use
Toilet lifters ensure optimum ergonomics at a toilet, for both seated and standing users with disabilities.
Rasmus Thygesen
Design year
The toilet lifter is mainly constructed of anodised aluminium. The front plate and the bottom plate are made of polystyrene (PS).
Toilet lifters are available in three different colours which all harmonise with modern bathrooms, resulting in a comfortable and inviting toilet environment. Rounded corners and edges make cleaning quick and easy – there are no concealed edges or holes where dirt can hide.
The toilet lifter is available with a wired hand control which makes it easy for the user or helper to adjust the height. Seat height can be adjusted a full 400 mm from 425 to 825 mm – even while the user is sitting on the toilet.
Product capacity
Maximum user mass: 200 kg.
Maximum load: 235 kg. (user mass + accessories).
When the toilet lifter is loaded with 235 kg, each wall fastener is loaded with 94 kg.
The toilet lifter has been tested statically with 600 kg, which is a requirement according to the applied assistive products standards. Please note that most toilet pans compatible with this lifter have been tested up to 400 kg.
Dimensioned drawing, mm
Height adjustable
Adjustment height
400 mm
Mains connection (V)
230 V
50-60 Hz
Power consumption (maximum load)
70 W
Power consumption (standby)
2 W
12 mm/s
Noise level
48 dB
Actuator (motor)
LA31 Careline, (Linak), 4000N, IPX6
Control box
CB9 Careline, (Linak), IPX6
Wired remote control
HB3 (Linak), IP66
Maximum user weight
200 kg
Maximum load
235 kg
Sales unit
60.7 kg
Gross weight
65.7 kg
Weight per crate
65.7 kg
Crates per pallet
Qty per crate
Qty per pallet

SELECT toilet lifter.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

Clinimax Difficil-S
Erisan OXY+

Suma Star free D1
Taski 100
Taski 200

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.

Declaration of conformity
This product complies with the requirements of Council Directive 93/42/EEC concerning medical devices, as last amended by Council Directive 2007/47/EC of 5 September 2007. It also complies with all relevant requirements in the Council Directive 2006/42/EC (of 17 May 2006) on machinery and the Council Directive 2011/65/EC on RoHS.
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.