Solution with daycare changing table 800 x 1400 mm, with sanitary appliances and mattress
Products in this bundle
Specifications for Changing table mattress 950 mm
Mattress 760 mm x 950 mm x 30 mm, for 1400 mm changing table with sanitary appliances.Phthalate-free
Upholstery (Cover): Techmadin, phthalate-free
Daily cleaning with soapy water and subsequent wiping over with a damp cloth, and wash regularly at 60-90º, without fabric softener. Shrinkage after washing may occur.
Do not turn inside out before washing. Can be tumble-dried at max. 60º.
Can be disinfected with antiseptic wipes. Alcohol % < 70.
Do not use disinfectants intended for hard surfaces.
The foam contains only DINP softeners which are approved by the EU for the use in articles for children.
Do not wash the foam.
Do not use the mattress without the cover for reasons of hygiene.
Specifications for Changing table, 800 x 1400 mm, electrically height adjustable, with sanitary appliances and standard mixer tap
Of particular use to daycare facilities and kindergartens are the low start wall-hung changing tables, which can be lowered to a height that allows children to climb onto the worktop themselves.
All types of daycare changing tables are available in versions with sanitary appliances and a choice of taps, with or without pull-out shower heads.
With electric motor and transformer, height adjustable from 650 mm - 1000 mm, with wired hand control.
Molded worktop with integrated sink, incl. lever operated mixer tap, feed/waste system and 2 wire baskets.
Materials: ABS plastics, synthetic acrylic and powder-lacquered steel.
Excl. mounting kit.
Always place the child on a changing table mattress and not directly on the table.
Expected service life is 10 years for institutional use, provided that maintenance is carried out as described in the user manual.
Worktop: ABS with acrylic.
Waste pipe: Polyurethane, PVC and steel. The flexible waste pipe is very resistant to both chemical and physical influences. It is flame retardant and withstands temperatures from -30°C to +110°C.
Integrated sink and tap.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
Suma Star free D1
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
- Council Directive 2006/42/EC on machinery
- Council Directive 2011/65/EC on RoHS.
For the UK: - The Supply of Machinery (Safety) Regulations 2008
- Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012