SELECT TL2 toilet lifter with side profiles, for floor outlet

SELECT TL2 toilet lifter with side profiles, for floor outlet
Manually height adjustable 300 mm (425-725 mm) with crank handle.
{{ productPrice.unitPrice.displayValue }}
(Taxes may apply)
Something went wrong
Product no.: R8112000 - EAN: 5708590345352
Different heights to suit different users/transfer techniques Manual or powered adjustment to suit different requirements - frequent/periodic adjustment Allows a range of support arms, back rests and WC's to be fitted for a bespoke solution

SELECT TL2 toilet lifter with side profiles, for floor outletSELECT TL2 toilet lifter with side profiles, for floor outletSELECT TL2 toilet lifter with side profiles, for floor outletSELECT TL2 toilet lifter with side profiles, for floor outlet


EAN 5708590345352
ETIM EC010062
GMDN 63053
HMI 105969
NRF 6191036
UNSPSC 42211615
VVS 617991500
Item number
Product group
Toilet lifters
SELECT TL2 toilet lifter with side profiles, for floor outlet
Product description
The aim is to make it as easy as possible for users to get on and off the toilet during daily use. The aim is also to make the carer’s work easier, and make the process comfortable and dignified for the user.
SELECT TL2 toilet lifter, 300 mm manually height adjustable, with crank handle.
Incl. cistern with dual flushing system preset at 3/6 litres.
Toilet pan and toilet seat to be ordered separately.
The integral vertical side profiles allow for addition of PLUS support arms.
For floor-outlet.
Materials: Anodised aluminium and polystyrene (PS).
Excl. mounting kit.
Mounting instructions
Excl. mounting kit. See Technical datasheet (pdf) for information on mounting kits suitable for various wall types.
Intended use
Toilet lifters ensure optimum ergonomics at a toilet, for both seated and standing users with disabilities.
Expected service life is 10 years, provided that maintenance is carried out as described in the user manual.
Rasmus Thygesen
Design year
Anodized aluminium.
The front plates are made of polystyrene (PS).
Top plate in compact laminate.
Flammability-tested (ISO 8191-1 and ISO 8191-2). Test report available.
Toilet lifters are available in three different colours which all harmonise with modern bathrooms, resulting in a comfortable and inviting toilet environment. A minimum of grooves, slots and holes makes cleaning fast and effective, and also results in an attractive and exclusive design.
The toilet can be raised and lowered using the crank handle. The crank handle can be positioned on either side of the lifter – without the need for tools.
It is possible to adjust the height of the toilet lifter using an electric drill as an alternative to the crank handle.
The toilet can be adjusted 300 mm, from 425 mm to 725 mm in height , so the height can always be perfectly matched to mobility aids such as a wheelchair.
Product capacity
Maximum user weight: 200 kg.
Maximum load: 235 kg. (user weight + accessories).
When the toilet lifter is loaded with 235 kg, each wall fastener is loaded with 65 kg.
The toilet lifter has been tested statically with 600 kg, which is a requirement according to the applied assistive products standards. Please note that most toilet pans compatible with this lifter have been tested up to 400 kg.
Dimensioned drawing, mm
Height adjustable
Adjustment height
300 mm
Maximum user weight (MUM)
200 kg
Safe working load (SWL)
235 kg
Sales unit
58.3 kg
Gross weight
63.3 kg
Weight per crate
63.3 kg
Crates per pallet
Qty per crate
Qty per pallet

SELECT toilet lifter.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

Clinimax Difficil-S
Erisan OXY+

Suma Star free D1
Taski 100
Taski 200

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.

Declaration of conformity
CE UK MDR-MASK This product is in compliance with all relevant requirements of:
- Regulation (EU) 2017/745 on medical devices
- Council Directive 2006/42/EC on machinery
For the UK:
- Medical Device Regulation (MDR) 2002 on medical devices.
- Supply of Machinery (Safety) Regulations 2008
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.


Top mounting