PLUS support arm with integrated counter-balance, 850 mm
Previous version: R3085, RF085, R3018, RF018
PLUS SUPPORT ARMS – Red Dot Product Design Award winner
Ergonomic design and integrated counter-balance function makes the support arms a user-friendly and safe choice.
The Red Dot Product Design Award is an international design award that honors product design, communication design and design concepts.
The distinction “Red Dot” has become established internationally as one of the most sought-after seals of quality for good design.
Suitable for use with toilet pans projecting 700 mm or floor standing toilets.
Replaces discontinued models R3085 and RF085.
Materials: The arms are constructed of 10-micrometre anodized aluminium, with a non-slip gripping surface made of soft SEBS incorporating a glass-reinforced nylon core
Excl. mounting kit.
Expected service life is 10 years, provided that maintenance is carried out as described in the user manual.
The hinge arm is also made of soft SEBS.
Internal components and fasteners are primarily made of stainless steel.
The hinge barrel is capped with ABS polymer.
The end of the support arm is enlarged so that it is easier to pull forward from a sitting position and also provides a clear sense of where the support arm ends.
Soft and slip-resistant material that has a warm feel.
The underside is shaped for the mounting of various accessories.
When the support arm is loaded with 150 kg, each wall fastener is loaded with 196 kg.
PLUS support arms have been tested statically with 700 kg (close to the wall), 425 kg (in the middle) and 225 kg (the outermost point).
PLUS support arms.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
Suma Star free D1
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.
The support arm is used as a support for sitting down or getting up from a toilet, or for sideways transfer from a wheelchair.
For indoor use in a wet environment, such as a bathroom or a washroom, in private homes, nursing homes and hospitals.
For institutional use, the expected life time is 10 years.
Life cycle test performed according to ISO 17966:2016.
For maintenance, please refer to user guide, which is enclosed with the product, and which can also be found on the website under "Downloads".>