PLUS shower seat 450 with aperture, manually height adjustable
Previous version: R7431, R7168
With backrest and armrests.
Can be height adjusted 195 mm
Can be set at the optimum height to suit the size and needs of user Moveable and detachable without the use of tools Range of colours, sizes and combinations of seat, backrest and arms
They are suitable for wall-mounting or for fitting to Pressalit PLUS wall tracks.
Materials: Comfortable polyurethane foam over a plywood core, fitted to an aluminium profile. The non-slip gripping surface of the armrests are made of soft SEBS incorporating a glass-reinforced nylon core.
Excl. mounting kit.
Expected service life of the shower seat is 10 years, provided that maintenance is carried out as described in the instructions for use (OMM).
Maximum load for armrests is 55 kg.
When the seat is loaded with 200 kg, each wall fastener is loaded with 24 kg.
The seat has been tested statically with safety factor 1.5, which is a requirement according to the applied assistive products standards.
PLUS shower seat.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
Important: Polyurethane surfaces of PLUS shower seats and PLUS backrests contains an antibacterial surface, which will be compromised if cleaned with anything other than soap and water.
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.