PLUS shower seat 450, manually height and manually sideways adjustable

PLUS shower seat 450, manually height and manually sideways adjustable
With backrest and armrests.
Can be height adjusted 195 mm.
For fitting to horizontal PLUS wall track (not included)
{{ productPrice.unitPrice.displayValue }}
(Taxes may apply)
Something went wrong

Back and arm rests

With aperture

Product no.: R7464112 - EAN: 5708590360041
Previous version: R7450, R7566
Maximum flexibility for multi user shower rooms Movable and detachable without the use of tools Range of colours, sizes and combinations of seat, backrest and arms

PLUS shower seat 450, manually height and manually sideways adjustable PLUS shower seat 450, manually height and manually sideways adjustable


EAN 5708590360041
ETIM EC010872
FDA INN/D135865
GMDN 34936
HMI 124233
NRF 6317141
UNSPSC 42211610
VVS 777516612
Item number
Previous version
R7450, R7566
Product group
Shower seats
PLUS shower seat 450, manually height and manually sideways adjustable
Product description
PLUS shower seats are offered in a number of colours. They are available as both fixed height, electrically adjustable and manually adjustable, with and without aperture, and with an option of back and armrests.
They are suitable for wall-mounting or for fitting to Pressalit PLUS wall tracks.
PLUS shower seat 450, with back- and armrests. Manually height adjustable by 195 mm and sideways adjustable, without the use of tools. Armrests are independently height adjustable. The seat and the armrests are foldable.
Materials: Comfortable polyurethane foam over a plywood core, fitted to an aluminium profile. The non-slip gripping surface of the armrests are made of soft SEBS.
For fitting to horizontal PLUS wall track (not included).
Mounting instructions
For fitting to horizontal PLUS wall track (not included).
Anthracite grey
Intended use
The shower seat is used to sit on during showering.
Expected service life of the shower seat is 10 years, provided that maintenance is carried out as described in the instructions for use (OMM).
Rasmus Thygesen
Design year
The shower seat is made of polyurethane (PU) foam with a plywood core and this is covered with an in-mould coated surface that is protected using a clear PU lacquer. The backrest is made of polyurethane (PU) foam protected using a clear PU lacquer. The arms are primarily constructed of 10-micrometre anodized aluminium, with a non-slip gripping surface at the end made of soft SEBS and inforporating a glass-reinforced nylon core. The hinge arm is also made of soft SEBS. Internal components and fasteners are primarily made of stainless steel. The hinge barrel is capped with ABS.
Ergonomically designed seat - contact surface are 450 x 437 mm. Soft and slip-resistant material that has a warm feel. The oval shape of the armrests gives an easy and comfortable surface to lean on and push against.
The seat, backrest and armrests can be adjusted simultaneously thanks to a safe and easy click system. The armrests can also be adjusted independently of the seat and backrest. The seat and armrests can fold up when not in use or to maximise floor space.
Product capacity
Maximum user mass (seat): 200 kg.
Maximum load for armrests is 55 kg.
When the seat is loaded with 200 kg, each wall fastener is loaded with 23 kg.

The seat has been tested statically with safety factor 1.5, which is a requirement according to the applied assistive products standards.

Dimensioned drawing, mm
Height and sideways adjustable
Adjustment height
195 mm
Maximum user weight (MUM)
200 kg
Safe working load (SWL)
200 kg
Sales unit
19.28 kg
Gross weight
21.42 kg
Weight per crate
21.42 kg
Crates per pallet
Qty per crate
Qty per pallet

PLUS shower seat.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

Important: Polyurethane surfaces of PLUS shower seats and PLUS backrests contains an antibacterial surface, which will be compromised if cleaned with anything other than soap and water.

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.

Declaration of conformity
CE MDR This product is in compliance with all relevant requirements of: - Regulation (EU) 2017/745 on medical devices.
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.