Toilet seat Dania without cover, 50 mm raised

EAN 5708590070476
ETIM EC011526
HMI 1811
NBS N13:300
NRF 6190526
UNSPSC 42211614
VVS 615684000

R23000

Toilet seats

Toilet seat Dania without cover, 50 mm raised

Toilet seat, Dania, with stabilising buffers, w/o cover, raised 50 mm. With raised cross bar hinge

Toilet seat, Dania, with stabilising buffers, w/o cover, raised 50 mm.
With raised cross bar hinge

White

Seat: Thermoset plastic (urea)

Strap: Stainless steel V2A

Raiser: Nylon (PA)

Special buffer: ABS-plastic

An ergonomically designed seat that is well suited to most people. Sideways transfer is easy because the seat is rather flat. The cover is comfortable to sit on, and when set upright it gives good support to the back.

Raised 5 cm to make it less difficult to sit down and stand up.

This product has been tested statically up to 225 kg. As the European standard for technical aids for disabled, BS/EN 12182:2012, requires a static test with safety factor 1.5, the nominal maximum load for this product is therefore 150 kg.

T9802

pcs

2.2 kg

2.5 kg

0 kg

0

0

Use a mild soap solution to clean the toilet seat. Please take care that the seat and hinges are not left damp. For disinfecting the seat, e.g. ethanol 85% can be used. Make sure that the product is wiped down with a soft rag wrung out in clear water and dried off with a soft, dry cloth immediately after disinfection. Avoid contact of the seat and hinges with abrasive, corrosive or chlorine-based cleaners, as these may cause damage or lead to flash rust. Therefore, when cleaning the bowl, make sure that the seat and cover are kept in an upright position until all cleaning agent has been flushed away.

Your Pressalit toilet seat is subject to a 10-year product warranty against presentation of receipt. You should contact the dealer or store where you purchased the seat in the event of a complaint. In the event of complaints about defective materials and/or manufacturing defects and/or functional limitations ascertained within a 10-year period, following proper use and cleaning of the toilet seat (we reserve the right to examine the toilet seat at our factory), Pressalit will deliver spare parts or replace the toilet seat by an identical or similar model. If the color is no longer available, Pressalit reserves its right to replace the toilet seat by a similar model in the color white. Upon replacement or delivery of a spare part, the warranty period will not be extended nor renewed. If replacement is not possible, Pressalit may instead refund the purchase price.

Subject to changes in the product range, technical changes and printing errors.