PLUS shower seat 310, fixed height

PLUS shower seat 310, fixed height
PLUS shower seat 310, fixed height
PLUS shower seat 310, fixed height
PLUS shower seat 310, fixed height
The seat is foldable.
Product no.: R7304000 - EAN: 5708590359274
Previous version: R7310, R7010
Space efficient Ergonomic seat, in soft non slip material Range of colours and sizes

PLUS shower seat 310, fixed heightPLUS shower seat 310, fixed height

Specifications

ProductCodes
EAN 5708590359274
ETIM EC010872
FDA INN/D135865
GMDN 34936
HMI 121181
NRF 6317084
UNSPSC 42211610
VVS 777513000
Item number
R7304000
Previous version
R7310, R7010
Product group
Shower seats
Product
PLUS shower seat 310, fixed height
Product description
PLUS shower seats are offered in a number of colours. They are available as both fixed height, electrically adjustable and manually adjustable, and with an option of back and armrests.
They are suitable for wall-mounting or for fitting to Pressalit PLUS wall tracks.
Description
PLUS shower seat 310. For fixed mounting. The seat is foldable.
Materials: Comfortable polyurethane foam over a plywood core, fitted to an aluminium profile.
Excl. mounting kit.
Replaces R7310
Mounting instructions
Excl. mounting kit. See Technical datasheet (pdf) for information on mounting kits suitable for various wall types.
Colour
White
Intended use
The shower seat is used to sit on during showering.
Expected service life of the shower seat is 10 years, provided that maintenance is carried out as described in the instructions for use (OMM).
Designer
Rasmus Thygesen
Design year
2011
Materials
The shower seat is made of polyurethane (PU) foam with a plywood core and this is covered with an in-mould coated surface that is protected using a clear PU lacquer. Internal components and fasteners are primarily made of stainless steel. The hinge barrel is capped with ABS.
Ergonomy
Ergonomically designed seat - contact surface are 450 x 437 mm. Soft and slip-resistant material that has a warm feel.
Features
The seat can fold up when not in use or to maximise floor space.
Product capacity
Maximum user mass: 200 kg.
When the seat is loaded with 200 kg, each wall fastener is loaded with 113 kg.

The seat has been tested statically with safety factor 1.5, which is a requirement according to the applied assistive products standards.

Dimensioned drawing, mm
Adjustability
Fixed mounting
Maximum user weight (MUM)
200 kg
Safe working load (SWL)
200 kg
Sales unit
pcs
Weight
5.83 kg
Gross weight
6.553 kg
Weight per crate
6.553 kg
Crates per pallet
20
Qty per crate
1
Qty per pallet
20
Cleaning

PLUS shower seat
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

DISINFECTANTS:
Erisan OXY+
Tvättsprit 70%
CaviCide surface disinfectant decontaminant cleaner
Rodalon Desinfektionsspray
Terralin protect (SCHÜLKE+)
Dismonzon Plus (BODE Chemie GmbH)

NON-DISINFECTANTS:
Wetrok Caledor (Wetrok)
Petrosol Citro (Büfa)

Important: Polyurethane surfaces of PLUS shower seats and PLUS backrests contains an antibacterial surface, which will be compromised if cleaned with anything other than soap and water.

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.
Declaration of conformity
CE MDR This product is in compliance with all relevant requirements of: - Regulation (EU) 2017/745 on medical devices.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.