Lift for worktop, electrically height adjustable

Lift for worktop, electrically height adjustable
For worktop length 2001 - 2400 mm
{{ productPrice.unitPrice.displayValue }}
(Taxes may apply)
Something went wrong
Product no.: RK1082 - EAN: 5708590293783
Multiple adjustment methods - crank handle and powered Intuitive controls that can be operated independently Height adjustment range assist variety of different user requirements

Lift for worktop, electrically height adjustableLift for worktop, electrically height adjustable

Specifications

ProductCodes
EAN 5708590293783
HMI 61267
Item number
RK1082
Product group
Lifts for kitchen worktop, freestanding
Product
Lift for worktop, electrically height adjustable
Product description
Pressalit INDIVO lifting units can be easily integrated into the private home, ensuring that the whole family can enjoy the full potential and use the height adjustable function. The lifting units can also help provide a flexible kitchen solution for e.g. care centers, school kitchens and school science labs, wherever there is a need for frequent height adjustments on kitchen worktops and cupboards.
Description
Electric lift for freestanding worktop.
For worktops from 2001 - 2400 mm.
Height adjustable 300 mm.
Including 2 telescopic legs, brackets, longitudinal and cross bracesand switch.
Pressalit recommends overhang of 400 mm at either end of worktop to allow for ease of approach in wheel-chair.
Please state desired length when ordering.
Intended use
INDIVO lifts may be used with most commercially available kitchen worktops and kitchen cupboards, allowing them to be adjusted in height so the kitchen can be used by both seated and standing people.
Expected service life for the INDIVO lifting units is 10 years.
Materials
Material:
Telescopic leg: Aluminium, ABS plastic
Cross braces: Aluminium
Brackets: Steel
Cable tray: ABS plastic
Switches: ABS plastic
Surface treatment:
Brackets: Powder lacquered (grey RAL 9006)
Ergonomy
A freestanding electric Indivo solution is a flexible work or dining table, primarily intended for use in the kitchen.
The height of the worktop can be quickly and easily adjusted to the given user or situation.
A freestanding worktop can also be used in rooms in which the walls are not strong enough to support the wall-mounted models.

Features
Lift heights are adjusted via switches set in the edge or directly under the worktop.
Operating switches can be placed anywhere.
The design of the legs and feet make the table stable and secure, and ensure the lift causes minimal inconvenience to wheelchair users.
The design of the lift makes it possible to use the worktop from all sides.
Height adjustable over a range of 300 mm.
Available for worktops of any length between 1400 mm and 3000 mm.

Product capacity
Maximum load (evenly distributed):
100 kg including worktop.
Dimensioned drawing, mm
Adjustability
Height adjustable
Adjustment height
300 mm
Power consumption (maximum load)
300 W
Power consumption (standby)
2 W
Speed upwards
20 mm/s
Speed, downwards
20 mm/s
Noise level
45 dB
Actuator (motor)
DB4 Deskline (Linak) 1000 N, IP22
Control box
CBD6 (Linak)
Sales unit
pcs
Weight
22 kg
Gross weight
24 kg
Weight per crate
24 kg
Crates per pallet
99999
Qty per crate
1
Qty per pallet
99999
Cleaning

INDIVO lift for kitchen worktop
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+
Sprit (husholdningssprit)
Suma Bac D10
Virkon
Rodalon Desinfektionsspray
Lysoformin Spezial
CaviCide
Sufanios Premium
Tvättsprit 70%

NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200
Milizid Citro

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.
WEEE
Please enquire of your local Pressalit subsidiary or distributor (in countries where there is no subsidiary) that will arrange for recycling of electronic waste in accordance with the WEEE directive.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of three years from the invoicing date.