INDIVO lift for wall cabinets 47.3''-94.5''

GTIN-13 5708590379074
EAN 5708590379074

RK1821

RK1721

Lifts for kitchen wall cabinets

INDIVO lift for wall cabinets 47.3''-94.5''

The name INDIVO relates to the individual configuration of the products.

INDIVO lift for wall cupboards, with two motors and control box. Max. load: 485 lbs including the cabinets.
Height adjustable 16.9'' with switches or wired remote control. When height adjusting downward, the lift will also move 7.1'' towards the user.
For wall cabinets width 47.3''-94.5''. Please indicate height, width and depth of wall cabinets when ordering.
Excl. mounting kit.

INDIVO lifts may be used with most commercially available kitchen countertops and kitchen cabinets, allowing them to be adjusted in height so the kitchen can be used by both seated and standing people.
Expected service life for the INDIVO lifting units is 10 years.

Material:
Lift motor: Steel
Cross braces: Aluminium
Switches: ABS plastic

Wall cabinets are moved diagonally, that is both vertically and towards the user. This makes it easy for seated users and children to see and access covered contents.
Height-adjustable wall cabinets provide extra storage options in kitchens where cabinets cannot be installed under countertops out of consideration for seated users.

Lift heights for wall cabinets are adjusted via switches in the front countertop edge.
Operating switches can be placed wherever you want along the front edge.
The switches are color-coded - aluminium to operate countertops, and red to operate wall cabinets.
The design of the lifts ensures that the lift motors are as discreet as possible, regardless of the cabinet position.
When the wall cabinets are lowered 41.2" to their lowest position, they are also extended 7" towards the user.

Max. load (including cabinets):
2 lifts: 485 lbs.

Height adjustable

16.94 inch

0.71 inch/s

0.71 inch/s

45 dB

DB4 Deskline (Linak) 1000 N, IP22

CBD6 (Linak)

HB53 (Linak), IPX1

pcs

80.91 lbs

85.41 lbs

85.41 lbs

99999

1

0

This product should be cleaned with hot water or a mild cleaning solution.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

DISINFECTANTS:
CaviCide

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that water deposits (Calcium, lime etc.) be removed from wall tracks and other aluminum parts using a solution of three parts of 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts should be wiped over with a damp cloth wrung out in plain water.

This product is solely intended for the US and Canada, and has no EU declaration of conformity.

Pressalit makes a commitment to remedy material and manufacturing defects for a period of three years from the invoicing date.