Lift for countertop, manually height adjustable

GTIN-13 5708590292762
HMI 54800
EAN 5708590292762

RK1111

Lifts for kitchen counter-top, wall-mounted

Lift for countertop, manually height adjustable

The name INDIVO relates to the individual configuration of the products.

Manual lift for countertop
Lift for countertop, with a crank handle
Including 2 brackets
Lengths from 39.4"-55.1".
Height adjustable 11.8".
Incl. mounting kit for brick wall
Please state desired length when ordering

INDIVO lifts may be used with most commercially available kitchen countertops and kitchen cabinets, allowing them to be adjusted in height so the kitchen can be used by both seated and standing people.
Expected service life for the INDIVO lifting units is 10 years.

Material:
Telescopic leg: Aluminium, ABS plastic
Cross braces: Aluminium
Brackets: Steel
Crank handle: Steel
Surface treatment:
Brackets: Powder lacquered (grey RAL 9006)

Kitchen countertops which can be adjusted in height using a crank handle are the budget solution for kitchens catering to both seated and standing users.
These are most commonly used in kitchens which do not require frequent, daily adjustment.

Manual lifts are adjusted in height using a crank handle.
They can be used with countertops, with or without an edge.
The crank handle socket can be positioned anywhere along the front edge, except under a sink or hob.
Lifts can be adapted to most standard kitchen components.
Lifts are available for countertops of any length between 23.6" and 118.1".
Height adjustable 11.8".

Maximum load (evenly distributed):
220 lbs including countertop.

Height adjustable

pcs

50.99 lbs

53.46 lbs

53.46 lbs

99999

1

99999

This product should be cleaned with hot water or a mild cleaning solution.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

DISINFECTANTS:
CaviCide

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that water deposits (Calcium, lime etc.) be removed from wall tracks and other aluminum parts using a solution of three parts of 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts should be wiped over with a damp cloth wrung out in plain water.

Pressalit makes a commitment to remedy material and manufacturing defects for a period of three years from the invoicing date.