PLUS shower seat 450, manually vertical and manually horizontal adjustable

PLUS shower seat 450, manually vertical and manually horizontal adjustable
PLUS shower seat 450, manually vertical and manually horizontal adjustable
PLUS shower seat 450, manually vertical and manually horizontal adjustable
PLUS shower seat 450, manually vertical and manually horizontal adjustable
With backrest.
Can be height adjusted 15". For fitting to horizontal PLUS wall track (not included)
{{ productPrice.unitPrice.displayValue }}
(Taxes may apply)
Something went wrong

Back and arm rests

With aperture

NoYes
Product no.: R7454035 - GTIN-13: 5708590359908
Previous version: R7440, R7565
Maximum flexibility for multi user shower rooms Movable and detachable without the use of tools Range of colours, sizes and combinations of seat, backrest and arms

PLUS shower seat 450, manually vertical and manually horizontal adjustable PLUS shower seat 450, manually vertical and manually horizontal adjustable

Specifications

ProductCodes
GTIN-13 5708590359908
ETIM EC010872
FDA INN/D135865
GMDN 34936
HMI 124239
NRF 6317131
UNSPSC 42211610
EAN 5708590359908
Item number
R7454035
Previous version
R7440, R7565
Product group
Shower seats
Product
PLUS shower seat 450, manually vertical and manually horizontal adjustable
Product description
PLUS shower seats are offered in a number of colours. They are available as both fixed height, electrically adjustable and manually adjustable, with and without aperture, and with an option of back and armrests.
They are suitable for wall-mounting or for fitting to Pressalit PLUS wall tracks.
Description
PLUS shower seat 450, with backrest. Manually height adjustable by 15" and adjustable horizontally, without the use of tools. The seat is foldable.
Materials: Comfortable polyurethane foam over a plywood core, fitted to an aluminium profile.
For mounting to horizontal wall track (not included).
Replaces R7440
Mounting instructions
For fitting to horizontal PLUS wall track (not included).
Color
Red (RAL 3003)
Intended use
The shower seat is used to sit on during showering.
Expected service life of the shower seat is 10 years, provided that maintenance is carried out as described in the instructions for use (OMM).
Designer
Rasmus Thygesen
Design year
2011
Materials
The shower seat is made of polyurethane (PU) foam with a plywood core and this is covered with a moulded coated surface that is protected using a clear PU lacquer. The backrest is made of polyurethane (PU) foam protected using a clear PU lacquer. Internal components and fasteners are primarily made of stainless steel. The hinge barrel is capped with ABS.
Ergonomy
Ergonomically designed seat - contact surface are 17.7" x 17.2". Soft and slip-resistant material that has a warm feel.
Features
The seat can fold up when not in use or to maximize floor space. The seat and backrest can be adjusted simultaneously thanks to a safe and easy click system.
Product capacity
Maximum user mass: 440 lbs.
When the seat is loaded with 440 lbs, each wall fastener is loaded with 37 lbs.

The seat has been tested statically with safety factor 1.5, which is a requirement according to the applied assistive products standards.

Dimensioned drawing, inch
Adjustability
Vertical and horizontal adjustable
Adjustment height
14.97 inch
Maximum user weight (MUM)
441 lbs
Maximum load (SWL)
441 lbs
Sales unit
pcs
Weight
33.38 lbs
Gross weight
38.1 lbs
Weight per crate
38.1 lbs
Crates per pallet
6
Qty per crate
1
Qty per pallet
6
Cleaning

This product should be cleaned with hot water or a mild cleaning solution.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

DISINFECTANTS:
CaviCide

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that water deposits (Calcium, lime etc.) be removed from wall tracks and other aluminum parts using a solution of three parts of 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts should be wiped over with a damp cloth wrung out in plain water.

Declaration of conformity
This product is in compliance with all relevant requirements of regulation (EU) 2017/745 on medical devices.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.