INDIVO lift for wall cupboards 1201-2400 mm

EAN 5708590378879

RK1421

RK1021

Lifts for kitchen wall cupboards

INDIVO lift for wall cupboards 1201-2400 mm

The name INDIVO relates to the individual configuration of the products.

INDIVO lift for wall cupboards, with two motors and control box.
Height adjustable 430 mm with switches or wired remote control. When height adjusting downward, the lift will also move 180 mm towards the user.
For wall cupboards width 1201-2400 mm. Please indicate height, width and depth of wall cupboards when ordering.
Excl. mounting kit.

INDIVO lifts may be used with most commercially available kitchen worktops and kitchen cupboards, allowing them to be adjusted in height so the kitchen can be used by both seated and standing people.
Expected service life for the INDIVO lifting units is 10 years.

Material:
Lift motor: Steel
Cross braces: Aluminium
Switches: ABS plastic

Wall cupboards are moved diagonally, that is both vertically and towards the user. This makes it easy for seated users and children to see and access covered contents.
Height-adjustable wall cupboards provide extra storage options in kitchens where cupboards cannot be installed under worktops out of consideration for seated users.

Lift heights for wall cupboards are adjusted via switches in the front worktop edge.
Operating switches can be placed wherever you want along the front edge.
The switches are colour-coded - aluminium to operate worktops, and red to operate wall cupboards.
The design of the lifts ensures that the lift motors are as discreet as possible, regardless of the cupboard position.
When the wall cupboards are lowered 430 mm to their lowest position, they are also extended 180 mm towards the user.

Max. load (including cupboards):
2 lifts: 220 kg

Height adjustable

430 mm

187 W

1.5 W

18 mm/s

18 mm/s

48 dB

LA31 Deskline (Linak), 3500N, IPX1

CBD6 (Linak)

HB53 (Linak), IPX1

pcs

33.6 kg

36 kg

36 kg

99999

1

0

INDIVO lift for kitchenwall cupboard.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+

NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.

CE UK RoHS_LVD_EMC This product is in compliance with relevant requirements in:
- the RoHS Directive 2011/65/EU
- the EMC Directive 2014/30/EU
- the Low Voltage Directive 2014/35/EU.
Furthermore, for the UK, in compliance with relevant requirements in:
- The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
- The Electromagnetic Compatibility Regulations 2016
- The Electrical Equipment (Safety) Regulations 2016

Pressalit makes a commitment to remedy material and manufacturing defects for a period of three years from the invoicing date.