Shower mattress for MSCT 1 and MSCT 4

Accessory for a medical device

ACCESSORY MDR

Pressalit makes a commitment to remedy material and manufacturing defects for a period of three years from the invoicing date.

This product is produced in compliance with all relevant requirements of:
- Regulation (EU) 2017/745 on medical devices (Risk class I, rule 1)
This product is considered to be an accessory for a medical device, as it is not itself a medical device, but is intended to be used together with several particular medical devices to specifically enable the medical devices to be used in accordance with their intended purposes.

The mattress cover is welded polyester fabric with PVC-coating. It is UV-resistant and 100% impermeable to water. It contains neither CFC nor latex. The foam filling is flexible polyether-based polyurethane foam, approved in accordance with Oeko-tex 100, Class I.

This product should be cleaned with hot water or a mild cleaning solution.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

DISINFECTANTS:
Sprit (husholdningssprit)
Tvättsprit 70%
Safe Zone Plus
Selgiene Extreme
Microsan
Accel PREVention Wipes Lingettes

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.