PLUS shower seat 310, fixed height
Product number: R7304000
EAN: 5708590359274
Previous versions: R7310, R7010
The seat is foldable.
Description
- Product description
- Space efficient
- Ergonomic seat, in soft non slip material
- Range of colours and sizes
- PLUS shower seats are offered in a number of colours. They are available as both fixed height, electrically adjustable and manually adjustable, and with an option of back and armrests.
They are suitable for wall-mounting or for fitting to Pressalit PLUS wall tracks. - PLUS shower seat 310. For fixed mounting. The seat is foldable.
Materials: Comfortable polyurethane foam over a plywood core, fitted to an aluminium profile.
Excl. mounting kit.
Replaces R7310
- Intended use
- The shower seat is used to sit on during showering.
Expected service life of the shower seat is 10 years, provided that maintenance is carried out as described in the instructions for use (OMM). - Features
- The seat can fold up when not in use or to maximize floor space.
- Ergonomy
- Ergonomically designed seat - contact surface are 12.2" x 14.4". Soft and slip-resistant material that has a warm feel.
- Product capacity
- Maximum user mass: 440 lbs.
When the seat is loaded with 440 lbs, each wall fastener is loaded with 187 lbs.
The seat has been tested statically with safety factor 1.5, which is a requirement according to the applied assistive products standards. - Warranty
- A 5-year warranty is provided for your product from the date of purchase.
The warranty covers material or manufacturing defects. The warranty does not cover defects or damage resulting from normal wear and tear, improper operation, misuse, inadequate maintenance, use of unsuitable cleaning agents, incorrect installation, or disassembly.
In the event of a claim, you must always contact the dealer or store where you purchased the product. The warranty is conditional upon proof of purchase of the product. Pressalit will supply a spare part or replace the product with the same or a similar model. The warranty period is neither extended nor renewed when replacement products or spare parts are supplied. If replacement is not possible, Pressalit is entitled instead to refund the purchase price.
These warranty terms apply in addition to the consumer's statutory rights and do not limit or exclude them.
Specifications
- Product codes
EAN
5708590359274VVS
777513000ETIM
EC010872NRF
6317084HMI
121181GMDN
34936FDA
INN/D135865UNSPSC
42211610EMDN
Y093303
- Previous version
- R7310, R7010
- Product group
- Shower seats
- Dimensioned drawing, inch
- Adjustability
- Fixed mounting
- Maximum user weight (MUM), lbs
- 441
- Declaration of conformity
- This product is produced in compliance with all relevant requirements of:
- Regulation (EU) 2017/745 on medical devices (Risk class I, rule 1) - Colour
- White
- Designer
- Rasmus Thygesen
- Design year
- 2011
- Materials
- The shower seat is made of polyurethane (PU) foam with a plywood core and this is covered with a moulded coated surface that is protected using a clear PU lacquer. Internal components and fasteners are primarily made of stainless steel. The hinge barrel is capped with ABS.
- Cleaning instructions
- This product should be cleaned with hot water or a mild cleaning solution.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISINFECTANTS:
Erisan OXY+
Tvättsprit 70%
CaviCide surface disinfectant decontaminant cleaner
Rodalon Desinfektionsspray
Terralin protect (SCHÜLKE+)
Dismonzon Plus (BODE Chemie GmbH)
NON-DISINFECTANTS:
Wetrok Caledor (Wetrok)
Petrosol Citro (Büfa)
Important: Polyurethane surfaces of PLUS shower seats and PLUS backrests contains an antibacterial surface, which will be compromised if cleaned with anything other than soap and water.
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that water deposits (Calcium, lime etc.) be removed from wall tracks and other aluminum parts using a solution of three parts of 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts should be wiped over with a damp cloth wrung out in plain water. - Sales unit
- pcs
- Net weight, lbs
- 12.9
- Gross weight, lbs
- 14.5
- Weight per crate, lbs
- 14.5
- Crates per pallet
- 20
- Qty per crate
- 1
- Qty per pallet
- 20
- Manufacturer
Mounting
- Mounting
- Excl. mounting kit. See Technical specifications (pdf) for information on mounting kits suitable for various wall types.