SELECT TL2 toilet lifter with side profiles, for floor outlet
Electrically height adjustable 15.7" (16.7" - 32.5") with wired remote control.
Different heights to suit different users/transfer techniques Manual or powered adjustment to suit different requirements - frequent/periodic adjustment Allows a range of support arms, back rests and WC's to be fitted for a bespoke solution
Please contact Pressalit for more information about compatible toilet bowls for Pressalit SELECT toilet lifters
Incl. cistern with dual flushing system preset at 3/6 liters.
Toilet pan and toilet seat to be ordered separately.
The integral vertical side profiles allow for addition of PLUS support arms.
Materials: Anodised aluminium and polystyrene (PS).
Excl. mounting kit.
Expected service life is 10 years, provided that maintenance is carried out as described in the user manual.
The front plates are made of polystyrene (PS).
Top plate in compact laminate.
Flammability-tested (ISO 8191-1 and ISO 8191-2). Test report available.
Maximum load: 518 lbs. (user weight + accessories).
When the toilet lifter is loaded with 518 lbs, each wall fastener is loaded with 207 lbs.
The toilet lifter has been tested statically with 1320 lbs, which is a requirement according to the applied assistive products standards. Please note that most toilets compatible with this lifter have been tested up to 880 lbs.
This product should be cleaned with hot water or a mild cleaning solution.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that water deposits (Calcium, lime etc.) be removed from wall tracks and other aluminum parts using a solution of three parts of 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts should be wiped over with a damp cloth wrung out in plain water.