PLUS sink bracket with lever control, manually height adjustable and horizontally adjustable with pneumatic cylinder
Previous version: R4760
Can be height adjusted 11.8" from 26.3" to 38.1". For MATRIX SMALL and CURVE/CURVE ll sinks
Space efficient Maximum flexibility for multiple users/changeable conditions Eliminates need for adaptation work in the future
They are suitable for wall-mounting or for fitting to Pressalit PLUS wall tracks.
Materials: Aluminium and ABS polymer.
Incl. mounting bolts for sink. For mounting on horizontal wall track (not included).
Expected service life is 10 years, provided that maintenance is carried out as described in the user manual.
Suitable for sinks weighing no more than 49 lbs.
When the sink is loaded with 298 lbs, each wall fastener will be carrying 66 lbs.
Sink brackets need to be able to carry the weight of the sink, as well as support the weight of the person who is leaning against the sink or who is using the sink to rise from seated position.
Neither sink nor sink bracket are intended to carry the full body weight of a person, and the test methods applicable to sink brackets reflect this: ISO 17966 prescribes a static test on the front edge of the sink at 75% of maximum user weight, i.e. when the maximum load on a sink bracket is given as 298 lbs and the wash basin weighs 49 lbs, it is – according to ISO 17966 – the equivalent of a user weighing 332 lbs leaning on the front edge of the wash basin.
This product should be cleaned with hot water or a mild cleaning solution.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that water deposits (Calcium, lime etc.) be removed from wall tracks and other aluminum parts using a solution of three parts of 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts should be wiped over with a damp cloth wrung out in plain water.