PLUS grab bar 39.4"

GTIN-13 5708590145945
ETIM EC011028
GMDN 35586
HMI 19085
NBS N13:436
NRF 6191673
RSK 8980552
UNSPSC 42211608
VVS 777565500
EAN 5708590145945

RT104000

Grab bars

PLUS grab bar 39.4"

PLUS grab bars are high-quality products and they can be combined in countless ways and they provide the final touch to furnishing a functional and flexible bathroom. A reliable solution with many different options, which can easily lay the grounds for increased independence.

PLUS grab bar, diameter 1.3", 39.4", for fixed mounting.
Material: Powder-coated aluminium and plastic.
Excl. mounting kit.

Excl. mounting kit. See Technical specifications (pdf) for information on mounting kits suitable for various wall types.

White

PLUS grab bar solutions are intended as a support for walking and standing users in the bathroom or for assisting seated users who need help getting up.
Expected service life is 10 years.

Core material: Aluminium
Surface material: Polyester lacquer
Cover cap: Cycoloy plastic

The 1.3" diameter enables the rail to be held comfortably and firmly. The projection of 2" from the wall makes it easy to take hold of the rail.

Maximum load: 440 lbs.
When the grab bar is loaded with 440 lbs, each wall fastener is loaded with 123 lbs.
Grab bars are tested with a 1.5 safety factor in accordance with the requirements in ISO 17966:2016.

pcs

3.23 lbs

4.01 lbs

4.01 lbs

48

1

48

This product should be cleaned with hot water or a mild cleaning solution.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

DISINFECTANTS:
CaviCide

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that water deposits (Calcium, lime etc.) be removed from wall tracks and other aluminum parts using a solution of three parts of 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts should be wiped over with a damp cloth wrung out in plain water.

This product is in compliance with all relevant requirements of regulation (EU) 2017/745 on medical devices.

Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.