Nursing home
Highlights
Products in this suggestion
9 products included
Specifications for Toilet seat Dania with cover
GTIN-13 5708590315966
ETIM EC011526
HMI 108574
NBS N13:300
NRF 6190607
UNSPSC 42211614
VVS 615679000
EAN 5708590315966
ETIM EC011526
HMI 108574
NBS N13:300
NRF 6190607
UNSPSC 42211614
VVS 615679000
EAN 5708590315966
Item number
R37000-D92999
Product group
Toilet seats
Product
Toilet seat Dania with cover
Product description
Toilet seat, Dania, with stabilizing buffers, with cover. With extra strong cross-bar hinge.
Description
Toilet seat, Dania, with stabilizing buffers, with cover. With extra strong cross-bar hinge.
Color
White
Materials
Seat/cover: Thermoset plastic (urea)
Strap: Stainless steel V2A
Strap: Stainless steel V2A
Ergonomy
An ergonomically designed toilet seat suitable for most people. Sideways transfer is easy because the seat is flat. The cover is comfortable to sit on, and when set in the upright position it provides good back support.
Product capacity
This product has been tested statically up to 825 lbs. As the European standard for technical aids for disabled, EN 12182:2012, requires a static test with safety factor 1.5, the nominal maximum load for this product is therefore 550 lbs.
Dimensioned drawing, inch
Hinge model
D92
Hinge drawing
Mounting
Bottom mounted
Sales unit
pcs
Weight
8.28 lbs
Carton size
457x389x68 mm
Gross weight
9.39 lbs
Weight per crate
46.93 lbs
Crates per pallet
18
Qty per crate
5
Qty per pallet
90
Cleaning
Use a mild soap solution to clean the toilet seat. Please take care that the seat and hinges are not left damp. For disinfecting the seat, e.g. ethanol 85% can be used. Make sure that the product is wiped down with a soft rag wrung out in clear water and dried off with a soft, dry cloth immediately after disinfection.
Avoid contact of the seat and hinges with abrasive, corrosive or chlorine-based cleaners, as these may cause damage or lead to flash rust. Therefore, when cleaning the bowl, make sure that the seat and cover are kept in an upright position until all cleaning agent has been flushed away.
Avoid contact of the seat and hinges with abrasive, corrosive or chlorine-based cleaners, as these may cause damage or lead to flash rust. Therefore, when cleaning the bowl, make sure that the seat and cover are kept in an upright position until all cleaning agent has been flushed away.
Warranty
Your Pressalit toilet seat is subject to a 10-year product warranty against presentation of receipt. You should contact the dealer or store where you purchased the seat in the event of a complaint.
In the event of complaints about defective materials and/or manufacturing defects and/or functional limitations ascertained within a 10-year period, following proper use and cleaning of the toilet seat (we reserve the right to examine the toilet seat at our factory), Pressalit will deliver spare parts or replace the toilet seat by an identical or similar model. If the color is no longer available, Pressalit reserves its right to replace the toilet seat by a similar model in the color white. Upon replacement or delivery of a spare part, the warranty period will not be extended nor renewed. If replacement is not possible, Pressalit may instead refund the purchase price.
In the event of complaints about defective materials and/or manufacturing defects and/or functional limitations ascertained within a 10-year period, following proper use and cleaning of the toilet seat (we reserve the right to examine the toilet seat at our factory), Pressalit will deliver spare parts or replace the toilet seat by an identical or similar model. If the color is no longer available, Pressalit reserves its right to replace the toilet seat by a similar model in the color white. Upon replacement or delivery of a spare part, the warranty period will not be extended nor renewed. If replacement is not possible, Pressalit may instead refund the purchase price.
Subject to changes in the product range, technical changes and printing errors.
Product fits
Manufacturer
Bowl
IFÖ Sanitär AB
Sign
Spira
Spira, høj , lukket S-lås, rimfree
Cera væghængt
Spira
Spira, høj , lukket S-lås, rimfree
Cera væghængt
Laufen AG
Pro-N
Moderna R Rimfree
Moderna R Rimfree
Gustavsberg (V & B)
Nautic
Saval Pro
Saval Pro
Villeroy & Boch
O.novo Vita
O.Novo rimfree
Omnia Classic
O.Novo rimfree
Omnia Classic
LAUFEN CZ s. r. o.
Deep by Jika New
Grohe A/S
Bau Ceramic
VITRA
Matrix
Pressalit A/S
O.Novo ny skyllekant
R2099
R2099
Sparepart drawing
PLUS grab bar combination for shower, 39.4" x 42.9"
Product no.: RT144000
Multiple variants
Specifications for PLUS grab bar combination for shower, 39.4" x 42.9"
GTIN-13 5708590247649
ETIM EC010140
GMDN 35586
HMI 42068
NBS N13:436
NRF 6311235
RSK 8180962
UNSPSC 42211608
VVS 777569700
EAN 5708590247649
ETIM EC010140
GMDN 35586
HMI 42068
NBS N13:436
NRF 6311235
RSK 8180962
UNSPSC 42211608
VVS 777569700
EAN 5708590247649
Item number
RT144000
Product group
Grab bars
Product
PLUS grab bar combination for shower, 39.4" x 42.9"
Product description
PLUS grab bars are high-quality products and they can be combined in countless ways and they provide the final touch to furnishing a functional and flexible bathroom. A reliable solution with many different options, which can easily lay the grounds for increased independence.
Description
PLUS grab bar combination for shower, A: 39.4" x B: 42.9".
Compatible with RT600 shower holder.
Material: Powder-coated aluminium and plastic.
Excl. mounting kit.
Compatible with RT600 shower holder.
Material: Powder-coated aluminium and plastic.
Excl. mounting kit.
Color
White
Intended use
PLUS grab bar solutions are intended as a support for walking and standing users in the bathroom or for assisting seated users who need help getting up.
Expected service life is 10 years.
Expected service life is 10 years.
Materials
Core material: Aluminium
Surface material: Polyester lacquer
Cover cap: Cycoloy plastic
Strap: Nylon (PA)
Surface material: Polyester lacquer
Cover cap: Cycoloy plastic
Strap: Nylon (PA)
Product capacity
Maximum load: 440 lbs.
When the grab bar is loaded with 440 lbs, each wall fastener is loaded with 123 lbs.
Grab bars are tested with a 1.5 safety factor in accordance with the requirements in ISO 17966:2016.
When the grab bar is loaded with 440 lbs, each wall fastener is loaded with 123 lbs.
Grab bars are tested with a 1.5 safety factor in accordance with the requirements in ISO 17966:2016.
Dimensioned drawing, inch
Sales unit
pcs
Weight
6.21 lbs
Gross weight
7.91 lbs
Weight per crate
7.91 lbs
Crates per pallet
48
Qty per crate
1
Qty per pallet
48
Cleaning
This product should be cleaned with hot water or a mild cleaning solution.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISINFECTANTS:
CaviCide
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that water deposits (Calcium, lime etc.) be removed from wall tracks and other aluminum parts using a solution of three parts of 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts should be wiped over with a damp cloth wrung out in plain water.
Declaration of conformity
This product is in compliance with all relevant requirements of regulation (EU) 2017/745 on medical devices.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for MATRIX MEDIUM vanity sink without overflow
GTIN-13 5708590349398
ETIM EC011550
HMI 105902
NRF 6132438
UNSPSC 30181504
VVS 639862000
EAN 5708590349398
ETIM EC011550
HMI 105902
NRF 6132438
UNSPSC 30181504
VVS 639862000
EAN 5708590349398
Item number
R2121000
Product group
Sinks
Product
MATRIX MEDIUM vanity sink without overflow
Product description
MATRIX is a series of sinks, most of them are designed by Pressalit.
MATRIX SMALL and CURVE sinks fit onto PLUS, SELECT and VALUE sink brackets, whereas MATRIX MEDIUM and ANGLE are tailor made to fit specific brackets.
MATRIX SMALL and CURVE sinks fit onto PLUS, SELECT and VALUE sink brackets, whereas MATRIX MEDIUM and ANGLE are tailor made to fit specific brackets.
Description
MATRIX MEDIUM vanity wash basin, 30.7'' x 21.6'' x 5.7'', with two integrated grab bar handles in the front, with faucet hole 1.4'', without overflow. Drain fitting must be ordered separately. The sink has raised edges, preventing water from running over the back or down the outer sides.
Materials: Cultured marble with a high-polished, pore-free sanitary gel coating.
Can be used with MATRIX sink bracket R4826 or MATRIX supports R2015.
Materials: Cultured marble with a high-polished, pore-free sanitary gel coating.
Can be used with MATRIX sink bracket R4826 or MATRIX supports R2015.
Mounting instructions
Mounting material for this sink is included with the bracket/lifter.
Color
White
Materials
Cultured marble with a high-polished, nonporous sanitary gel coating.
Product capacity
397 lbs.
Dimensioned drawing, inch
Sales unit
pcs
Weight
59.52 lbs
Gross weight
65.48 lbs
Weight per crate
65.48 lbs
Crates per pallet
5
Qty per crate
1
Qty per pallet
5
Cleaning
For cleaning the wash basin, use hot water and a mild soapy cleaning agent. Make sure that the product is wiped down with a soft rag wrung out in clear water immediately after cleaning.
For disinfecting the wash basin, the following agents can be used:
Sodium hydroxide 5%
Acetic acid solution 10%
Ethanol solution 70%
Sodium hypochlorite 5%, active chlorine
Sodium chloride 170g/l, diluted to 50%.
Make sure that the product is wiped down with a soft rag wrung out in clear water immediately after disinfection.
NB! Do not use abrasive cleaning agents, as this will cause damage to the surface of the wash basin.
For disinfecting the wash basin, the following agents can be used:
Sodium hydroxide 5%
Acetic acid solution 10%
Ethanol solution 70%
Sodium hypochlorite 5%, active chlorine
Sodium chloride 170g/l, diluted to 50%.
Make sure that the product is wiped down with a soft rag wrung out in clear water immediately after disinfection.
NB! Do not use abrasive cleaning agents, as this will cause damage to the surface of the wash basin.
Declaration of conformity
Declaration of Performance
Compliance criteria according to EN 14688:2015.
4.1 Load resistance: stable, without cracks or deformations.
4.2 Draining of water: Water drained away completely.
4.3 Resistance to temperature changes: Without cracks, delaminations.
4.4 Resistance to chemicals and staining agents:
- Sodium hydroxide 5% - without staining or deterioration;
- Acetic acid solution 10% - without staining or deterioration;
- Ethanol sol. 70% - without staining or deterioration;
- Sodium hypochlorite 5% active chlorine - without staining or deterioration;
- Sodium chloride 170g/l diluted to 50% - without staining or deterioration.
4.5 Surface stability / resistance to scratching: Do not use abrasives on the surface.
4.6 Cleanability: Smooth, non-absorbant surfaces.
4.7 Protection against overflowing: CL 00.
4.8 Durability: Product is considered durable.
Compliance criteria according to EN 14688:2015.
4.1 Load resistance: stable, without cracks or deformations.
4.2 Draining of water: Water drained away completely.
4.3 Resistance to temperature changes: Without cracks, delaminations.
4.4 Resistance to chemicals and staining agents:
- Sodium hydroxide 5% - without staining or deterioration;
- Acetic acid solution 10% - without staining or deterioration;
- Ethanol sol. 70% - without staining or deterioration;
- Sodium hypochlorite 5% active chlorine - without staining or deterioration;
- Sodium chloride 170g/l diluted to 50% - without staining or deterioration.
4.5 Surface stability / resistance to scratching: Do not use abrasives on the surface.
4.6 Cleanability: Smooth, non-absorbant surfaces.
4.7 Protection against overflowing: CL 00.
4.8 Durability: Product is considered durable.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for Soap holder
GTIN-13 5708590333755
ETIM EC010557
HMI 88858
NRF 6311237
VVS 777564500
EAN 5708590333755
ETIM EC010557
HMI 88858
NRF 6311237
VVS 777564500
EAN 5708590333755
Item number
RT190000
Product group
Storage and accessories
Product
Soap holder
Product description
Soap holder for grab bars
Description
Soap holder for grab bars
Color
White
Materials
Nylon (PA6)
Dimensioned drawing, inch
Sales unit
pcs
Weight
0.47 lbs
Gross weight
0.73 lbs
Weight per crate
8.76 lbs
Crates per pallet
16
Qty per crate
12
Qty per pallet
192
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
PLUS shower seat 450, manually height adjustable
Product no.: R7434112
Multiple variants
Specifications for PLUS shower seat 450, manually height adjustable
GTIN-13 5708590359809
ETIM EC010872
FDA INN/D135865
GMDN 34936
HMI 124335
NRF 6317125
UNSPSC 42211610
VVS 777515812
EAN 5708590359809
ETIM EC010872
FDA INN/D135865
GMDN 34936
HMI 124335
NRF 6317125
UNSPSC 42211610
VVS 777515812
EAN 5708590359809
Item number
R7434112
Previous version
R7430, R7166
Product group
Shower seats
Product
PLUS shower seat 450, manually height adjustable
Product description
PLUS shower seats are offered in a number of colours. They are available as both fixed height, electrically adjustable and manually adjustable, with and without aperture, and with an option of back and armrests.
They are suitable for wall-mounting or for fitting to Pressalit PLUS wall tracks.
They are suitable for wall-mounting or for fitting to Pressalit PLUS wall tracks.
Description
PLUS shower seat 450, with back- and armrests. Manually height adjustable by 7.7", without the use of tools. Armrests are independently height adjustable. The seat and the armrests are foldable.
Materials: Comfortable polyurethane foam over a plywood core, fitted to an aluminium profile. The non-slip gripping surface of the armrests are made of soft SEBS incorporating a glass-reinforced nylon core.
Excl. mounting kit.
Replaces R7430
Materials: Comfortable polyurethane foam over a plywood core, fitted to an aluminium profile. The non-slip gripping surface of the armrests are made of soft SEBS incorporating a glass-reinforced nylon core.
Excl. mounting kit.
Replaces R7430
Mounting instructions
Excl. mounting kit. See Technical specifications (pdf) for information on mounting kits suitable for various wall types.
Color
Anthracite gray
Intended use
The shower seat is used to sit on during showering.
Expected service life of the shower seat is 10 years, provided that maintenance is carried out as described in the instructions for use (OMM).
Expected service life of the shower seat is 10 years, provided that maintenance is carried out as described in the instructions for use (OMM).
Designer
Rasmus Thygesen
Design year
2011
Materials
The shower seat is made of polyurethane (PU) foam with a plywood core and this is covered with a moulded coated surface that is protected using a clear PU lacquer. The backrest is made of polyurethane (PU) foam protected using a clear PU lacquer. The arms are primarily constructed of 3/8" anodized aluminium, with a non-slip gripping surface at the end made of soft SEBS and inforporating a glass-reinforced nylon core. The hinge arm is also made of soft SEBS. Internal components and fasteners are primarily made of stainless steel. The hinge barrel is capped with ABS.
Ergonomy
Ergonomically designed seat - contact surface are 17.7" x 17.2". Soft and slip-resistant material that has a warm feel. The oval shape of the armrests gives an easy and comfortable surface to lean on and push against.
Features
The seat, backrest and armrests can be adjusted simultaneously thanks to a safe and easy click system. The armrests can also be adjusted independently of the seat and backrest. The seat and armrests can fold up when not in use or to maximize floor space.
Product capacity
Maximum user mass (seat): 440 lbs.
Maximum load for armrests is 55 kg.
When the seat is loaded with 440 lbs, each wall fastener is loaded with 40 lbs.
The seat has been tested statically with safety factor 1.5, which is a requirement according to the applied assistive products standards.
Maximum load for armrests is 55 kg.
When the seat is loaded with 440 lbs, each wall fastener is loaded with 40 lbs.
The seat has been tested statically with safety factor 1.5, which is a requirement according to the applied assistive products standards.
Dimensioned drawing, inch
Adjustability
Height adjustable
Adjustment height
7.68 inch
Maximum user weight (MUM)
441 lbs
Maximum load (SWL)
441 lbs
Sales unit
pcs
Weight
38.05 lbs
Gross weight
42.77 lbs
Weight per crate
42.77 lbs
Crates per pallet
3
Qty per crate
1
Qty per pallet
3
Cleaning
This product should be cleaned with hot water or a mild cleaning solution.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISINFECTANTS:
CaviCide
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that water deposits (Calcium, lime etc.) be removed from wall tracks and other aluminum parts using a solution of three parts of 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts should be wiped over with a damp cloth wrung out in plain water.
Declaration of conformity
This product is in compliance with all relevant requirements of regulation (EU) 2017/745 on medical devices.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for PLUS shower head holder
GTIN-13 5708590169965
ETIM EC010132
HMI 42227
NBS N13:40,375
NRF 6191674
RSK 8180966
VVS 777564700
EAN 5708590169965
ETIM EC010132
HMI 42227
NBS N13:40,375
NRF 6191674
RSK 8180966
VVS 777564700
EAN 5708590169965
Item number
RT600000
Product group
Shower accessories
Product
PLUS shower head holder
Product description
Shower head holder for placing on vertical grab bars.
Description
Shower head holder for placing on vertical grab bars.
Mounting instructions
Mounting material included.
Color
White
Materials
Polycarnonate (PC) and ABS plastic
Ergonomy
Easy height adjustment with one hand or hands with little strength.
Features
For mounting on grab bars with a diameter of 1.3"
Sales unit
pcs
Weight
0.26 lbs
Gross weight
0.44 lbs
Weight per crate
0.44 lbs
Crates per pallet
125
Qty per crate
1
Qty per pallet
125
Cleaning
This product should be cleaned with hot water or a mild cleaning solution. Do not use chlorine based or corrosive cleaners as it may result in the surface being damaged.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for Paper holder for PLUS fold down grab bar
GTIN-13 5708590314679
ETIM EC010553
HMI 71813
NBS N13:436
NRF 6190665
UNSPSC 30181610
VVS 615859100
EAN 5708590314679
ETIM EC010553
HMI 71813
NBS N13:436
NRF 6190665
UNSPSC 30181610
VVS 615859100
EAN 5708590314679
Item number
R9321
Product group
Fold down grab bars and arm supports
Product
Paper holder for PLUS fold down grab bar
Product description
Paper holder, for mounting to underside of PLUS fold down grab bar.
Description
Paper holder, for mounting to underside of PLUS support arm.
Mounting instructions
Mounting material included.
Materials
Aluminium
Sales unit
pcs
Weight
0.56 lbs
Gross weight
0.57 lbs
Weight per crate
0.57 lbs
Qty per crate
1
Qty per pallet
0
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Shower faucet with thermostat and black operating levers easy to handle
Product no.: RT640
Multiple variants
Specifications for Shower faucet with thermostat and black operating levers easy to handle
GTIN-13 5708590211824
ETIM EC011329
HMI 35288
NBS N13:40,375
NRF 6311291
RSK 8344043
UNSPSC 30181702
VVS 719015604
EAN 5708590211824
ETIM EC011329
HMI 35288
NBS N13:40,375
NRF 6311291
RSK 8344043
UNSPSC 30181702
VVS 719015604
EAN 5708590211824
Item number
RT640
Product group
Shower accessories
Product
Shower faucet with thermostat and black operating levers easy to handle
Product description
Shower faucet with thermostat and black operating levers easy to handle.
VA-approved (Denmark).
VA-approved (Denmark).
Description
Shower faucet with thermostat and black operating levers easy to handle.
VA-approved (Denmark).
VA-approved (Denmark).
Materials
Core material: brass
Protective cover: plastic
Handles: plastic
Protective cover: plastic
Handles: plastic
Ergonomy
Design and contrasting color of the operating handles make the "wing-shaped" handles easy to see and to use.
Features
The Shower faucet is heat insulated.
Can be mounted on the Shower faucet bracket RT760.
Can be mounted on the Shower faucet bracket RT760.
Dimensioned drawing, inch
Sales unit
pcs
Weight
3.81 lbs
Gross weight
4.16 lbs
Weight per crate
4.16 lbs
Crates per pallet
100
Qty per crate
1
Qty per pallet
100
Cleaning
This product should be cleaned with hot water or a mild cleaning solution. Do not use chlorine based or corrosive cleaners as it may result in the surface being damaged.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for Wall-mounted toilet 27 4/8"
GTIN-13 5708590345284
ETIM EC011289
HMI 105700
NRF 6191026
UNSPSC 30181505
VVS 612928000
EAN 5708590345284
ETIM EC011289
HMI 105700
NRF 6191026
UNSPSC 30181505
VVS 612928000
EAN 5708590345284
Item number
R2099000
Product group
Toilets
Product
Wall-mounted toilet 27 4/8"
Product description
Toilet, wall-mounted, distance from wall to the front: 27 4/8"
Excl. mounting kit.
For mounting directly on wall, a mounting kit from V&B must be ordered from Pressalit at an additional cost. For mounting on built-in cistern or Pressalit toilet lifter, mounting kit is included in the delivery.
Excl. mounting kit.
For mounting directly on wall, a mounting kit from V&B must be ordered from Pressalit at an additional cost. For mounting on built-in cistern or Pressalit toilet lifter, mounting kit is included in the delivery.
Description
Toilet, wall-mounted, distance from wall to the front: 27 4/8".
Excl. mounting kit.
Excl. mounting kit.
Color
White
Materials
Sanitary porcelain
Ergonomy
27 4/8" is recommended for wheelchair users as it provides sufficient space for a caregiver.
Wall mounted toilet makes mounting possible at individual height. Leaves space for foot support, the legs of a floor lift, and the caregiver's feet.
Wall mounted toilet makes mounting possible at individual height. Leaves space for foot support, the legs of a floor lift, and the caregiver's feet.
Product capacity
Max load: 880 lbs.
Sales unit
pcs
Weight
48.5 lbs
Gross weight
48.5 lbs
Weight per crate
48.5 lbs
Crates per pallet
12
Qty per crate
1
Qty per pallet
12
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Pressalit A/S
Pressalitvej 1
DK-8680 Ry
Danmark
T +45 8788 8788
E pressalit@pressalit.com
Pressalit Inc.
T +1 202-271-0166
E us@pressalit.com
