INDIVO lift for worktop 600-1000 mm

EAN 5708590378565

RK1250202

Lifts for kitchen worktop, wall-mounted

INDIVO lift for worktop 600-1000 mm

The name INDIVO relates to the individual configuration of the products.
Lifts are available for worktops of any length between 600 mm and 3000 mm.

INDIVO lift for worktop, with three motors and control box.
Incl. cross brace and two brackets.
Height adjustable up to 300 mm with switch or wired remote control.
For worktop length 600-1000 mm. Please indicate length and depth of worktop when ordering.
Excl. mounting kit.

Excl. mounting kit. See Technical datasheet (pdf) for information on mounting kits suitable for various wall types.

Grey (RAL 9006)

INDIVO lifts may be used with most commercially available kitchen worktops and kitchen cupboards, allowing them to be adjusted in height so the kitchen can be used by both seated and standing people.
Expected service life for the INDIVO lifting units is 10 years.

Lifting columns: Powder-coated steel
Cross brace: Aluminium
Brackets: Powder-coated steel

An electric height-adjustable kitchen worktop is ideal in all situations where various users - both seated and standing - use the same kitchen.
This is equally true in private homes as well as larger centres with common kitchen facilities such as group homes and care centres.

Lifts are height adjusted either via switches in the front edge or with a wired remote control.

Maximum load: 150 kg, this includes the weight of the worktop.
The load must be evenly distributed.

Height adjustable

300 mm

300 W

2 W

20 mm/s

20 mm/s

45 dB

DL17 Deskline (Linak) 70N, IP22

CBD6S (Linak) IP22

HB53 (Linak), IPX1

pcs

36.7 kg

38.74 kg

38.74 kg

99999

1

0

INDIVO lift for kitchen worktop.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+

NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.

CE UK RoHS_LVD_EMC This product is in compliance with relevant requirements in:
- the RoHS Directive 2011/65/EU
- the EMC Directive 2014/30/EU
- the Low Voltage Directive 2014/35/EU.
Furthermore, for the UK, in compliance with relevant requirements in:
- The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
- The Electromagnetic Compatibility Regulations 2016
- The Electrical Equipment (Safety) Regulations 2016

Pressalit makes a commitment to remedy material and manufacturing defects for a period of three years from the invoicing date.