Nursing home
Highlights
Products in this suggestion
11 products included
Specifications for Toilet seat Dania with cover
EAN 5708590315966
ETIM EC011526
HMI 108574
NBS N13:300
NRF 6190607
UNSPSC 42211614
VVS 615679000
ETIM EC011526
HMI 108574
NBS N13:300
NRF 6190607
UNSPSC 42211614
VVS 615679000
Item number
R37000-D92999
Product group
Toilet seats
Product
Toilet seat Dania with cover
Product description
Toilet seat, Dania, with stabilising buffers, with cover. With extra strong cross-bar hinge.
Description
Toilet seat, Dania, with stabilising buffers, with cover. With extra strong cross-bar hinge.
Colour
White
Materials
Seat/cover: Thermoset plastic (urea)
Strap: Stainless steel V2A
Strap: Stainless steel V2A
Ergonomy
An ergonomically designed seat that is well suited to most people. Sideways transfer is easy because the seat is rather flat. The cover is comfortable to sit on, and when set upright it gives good support to the back.
Product capacity
This product has been tested statically up to 375 kg. As the European standard for technical aids for disabled, BS/EN 12182:2012, requires a static test with safety factor 1.5, the nominal maximum load for this product is therefore 250 kg.
Dimensioned drawing, mm
Hinge model
D92
Hinge drawing
Mounting
Bottom mounted
Sales unit
pcs
Weight
3.757 kg
Gross weight
4.257 kg
Weight per crate
21.285 kg
Crates per pallet
18
Qty per crate
5
Qty per pallet
90
Cleaning
Use a mild soap solution to clean the toilet seat. Please take care that the seat and hinges are not left damp. For disinfecting the seat, e.g. ethanol 85% can be used. Make sure that the product is wiped down with a soft rag wrung out in clear water and dried off with a soft, dry cloth immediately after disinfection.
Avoid contact of the seat and hinges with abrasive, corrosive or chlorine-based cleaners, as these may cause damage or lead to flash rust. Therefore, when cleaning the bowl, make sure that the seat and cover are kept in an upright position until all cleaning agent has been flushed away.
Avoid contact of the seat and hinges with abrasive, corrosive or chlorine-based cleaners, as these may cause damage or lead to flash rust. Therefore, when cleaning the bowl, make sure that the seat and cover are kept in an upright position until all cleaning agent has been flushed away.
Warranty
Your Pressalit toilet seat is subject to a 10-year product warranty against presentation of receipt. You should contact the dealer or store where you purchased the seat in the event of a complaint.
In the event of complaints about defective materials and/or manufacturing defects and/or functional limitations ascertained within a 10-year period, following proper use and cleaning of the toilet seat (we reserve the right to examine the toilet seat at our factory), Pressalit will deliver spare parts or replace the toilet seat by an identical or similar model. If the color is no longer available, Pressalit reserves its right to replace the toilet seat by a similar model in the color white. Upon replacement or delivery of a spare part, the warranty period will not be extended nor renewed. If replacement is not possible, Pressalit may instead refund the purchase price.
In the event of complaints about defective materials and/or manufacturing defects and/or functional limitations ascertained within a 10-year period, following proper use and cleaning of the toilet seat (we reserve the right to examine the toilet seat at our factory), Pressalit will deliver spare parts or replace the toilet seat by an identical or similar model. If the color is no longer available, Pressalit reserves its right to replace the toilet seat by a similar model in the color white. Upon replacement or delivery of a spare part, the warranty period will not be extended nor renewed. If replacement is not possible, Pressalit may instead refund the purchase price.
Subject to changes in the product range, technical changes and printing errors.
Product fits
Manufacturer
Bowl
IFÖ Sanitär AB
Sign
Spira
Cera væghængt
Spira
Cera væghængt
Gustavsberg (V & B)
Nautic
Saval Pro
Saval Pro
Laufen AG
Moderna R Rimfree
Pro-N
Pro-N
Villeroy & Boch
O.novo Vita
O.Novo rimfree
Omnia Classic
O.Novo rimfree
Omnia Classic
LAUFEN CZ s. r. o.
Deep by Jika New
Grohe A/S
Grohe Bau Ceramic
VITRA
Matrix
Pressalit A/S
O.Novo ny skyllekant
Sparepart drawing
Specifications for PLUS handrail combination for shower, 1000 x 1090 mm
EAN 5708590247649
ETIM EC010140
GMDN 35586
HMI 42068
NBS N13:436
NRF 6311235
RSK 8180962
UNSPSC 42211608
VVS 777569700
ETIM EC010140
GMDN 35586
HMI 42068
NBS N13:436
NRF 6311235
RSK 8180962
UNSPSC 42211608
VVS 777569700
Item number
RT144000
Product group
Handrails
Product
PLUS handrail combination for shower, 1000 x 1090 mm
Product description
PLUS handrails are high-quality products and they can be combined in countless ways and they provide the final touch to furnishing a functional and flexible bathroom. A reliable solution with many different options, which can easily lay the grounds for increased independence.
Description
PLUS handrail combination for shower, A: 1000 mm x B: 1090 mm.
Compatible with the RT600 shower holder, for fixed mounting.
The projection of 50 mm from the wall makes it easy to take hold of the rail.
Inkl. wall rosette, which covers the fixings.
Material: Powder-coated aluminium and plastic.
Excl. mounting kit.
Compatible with the RT600 shower holder, for fixed mounting.
The projection of 50 mm from the wall makes it easy to take hold of the rail.
Inkl. wall rosette, which covers the fixings.
Material: Powder-coated aluminium and plastic.
Excl. mounting kit.
Colour
White
Intended use
PLUS hand rail solutions are intended as a support for walking and standing users in the bathroom or for assisting seated users who need help getting up.
Expected service life is 10 years.
Expected service life is 10 years.
Materials
Basic material: Aluminium
Surface material: Polyester lacquer
Cover cap: Cycoloy plastic
Strap: Nylon (PA)
Surface material: Polyester lacquer
Cover cap: Cycoloy plastic
Strap: Nylon (PA)
Product capacity
Maximum load: 235 kg.
When the handrail is loaded with 235 kg, each wall fastener is loaded with 56 kg.
Handrails are tested with a 1.5 safety factor in accordance with the requirements in ISO 17966:2016.
When the handrail is loaded with 235 kg, each wall fastener is loaded with 56 kg.
Handrails are tested with a 1.5 safety factor in accordance with the requirements in ISO 17966:2016.
Dimensioned drawing, mm
Sales unit
pcs
Weight
2.815 kg
Gross weight
3.59 kg
Weight per crate
3.59 kg
Crates per pallet
48
Qty per crate
1
Qty per pallet
48
Cleaning
Handrails ALU.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+
NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.
Declaration of conformity
CE UK MDR This product is in compliance with all relevant requirements of:
- Regulation (EU) 2017/745 on medical devices.
For the UK: - Medical Device Regulation (MDR) 2002 on medical devices.
- Regulation (EU) 2017/745 on medical devices.
For the UK: - Medical Device Regulation (MDR) 2002 on medical devices.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for MATRIX SMALL wash basin with overflow
EAN 5708590325064
ETIM EC011550
HMI 82610
NBS N13:30,335
NRF 6132501
RSK 7502999
VVS 636857100
ETIM EC011550
HMI 82610
NBS N13:30,335
NRF 6132501
RSK 7502999
VVS 636857100
Item number
R2020000
Product group
Wash basins
Product
MATRIX SMALL wash basin with overflow
Product description
MATRIX is a series of wash basins, most of them are designed by Pressalit. MATRIX SMALL and CURVE wash basins fit onto PLUS, SELECT and VALUE wash basin brackets, whereas MATRIX MEDIUM, ANGLE, ANGLE DEEP and SQUARE are tailor made to fit specific brackets.
Description
MATRIX SMALL wash basin, 600 x 490 x 130 mm, with two integrated handrails in the front, tap hole Ø36 mm, with overflow.
Supplied with drain fitting. The wash basin has raised edges, preventing water from running over the back or down the outer sides.
Materials: Cultured marble with a high-polished, pore-free sanitary gel coating.
Suitable for wash basin brackets from the Pressalit PLUS and SELECT ranges.
Supplied with drain fitting. The wash basin has raised edges, preventing water from running over the back or down the outer sides.
Materials: Cultured marble with a high-polished, pore-free sanitary gel coating.
Suitable for wash basin brackets from the Pressalit PLUS and SELECT ranges.
Mounting instructions
Excl. mounting kit. See Technical datasheet (pdf) for information on mounting kits suitable for various wall types.
Colour
White
Design year
2013
Materials
Cultured marble with a high-polished, pore-free sanitary gel coating.
Product capacity
200 kg.
Dimensioned drawing, mm
Sales unit
pcs
Weight
21.184 kg
Gross weight
23.184 kg
Weight per crate
23.184 kg
Crates per pallet
10
Qty per crate
1
Qty per pallet
10
Cleaning
For cleaning the wash basin, use hot water and a mild soapy cleaning agent. Make sure that the product is wiped down with a soft rag wrung out in clear water immediately after cleaning.
For disinfecting the wash basin, the following agents can be used:
Sodium hydroxide 5%
Acetic acid solution 10%
Ethanol solution 70%
Sodium hypochlorite 5%, active chlorine
Sodium chloride 170g/l, diluted to 50%.
Make sure that the product is wiped down with a soft rag wrung out in clear water immediately after disinfection.
NB! Do not use abrasive cleaning agents, as this will cause damage to the surface of the wash basin.
For disinfecting the wash basin, the following agents can be used:
Sodium hydroxide 5%
Acetic acid solution 10%
Ethanol solution 70%
Sodium hypochlorite 5%, active chlorine
Sodium chloride 170g/l, diluted to 50%.
Make sure that the product is wiped down with a soft rag wrung out in clear water immediately after disinfection.
NB! Do not use abrasive cleaning agents, as this will cause damage to the surface of the wash basin.
Declaration of conformity
Declaration of Performance
Compliance criteria according to EN 14688:2015.
4.1 Load resistance: stable, without cracks or deformations.
4.2 Draining of water: Water drained away completely.
4.3 Resistance to temperature changes: Without cracks, delaminations.
4.4 Resistance to chemicals and staining agents:
- Sodium hydroxide 5% - without staining or deterioration;
- Acetic acid solution 10% - without staining or deterioration;
- Ethanol sol. 70% - without staining or deterioration;
- Sodium hypochlorite 5% active chlorine - without staining or deterioration;
- Sodium chloride 170g/l diluted to 50% - without staining or deterioration.
4.5 Surface stability / resistance to scratching: Do not use abrasives on the surface.
4.6 Cleanability: Smooth, non-absorbant surfaces.
4.7 Protection against overflowing: CL 10.
4.8 Durability: Product is considered durable.
Compliance criteria according to EN 14688:2015.
4.1 Load resistance: stable, without cracks or deformations.
4.2 Draining of water: Water drained away completely.
4.3 Resistance to temperature changes: Without cracks, delaminations.
4.4 Resistance to chemicals and staining agents:
- Sodium hydroxide 5% - without staining or deterioration;
- Acetic acid solution 10% - without staining or deterioration;
- Ethanol sol. 70% - without staining or deterioration;
- Sodium hypochlorite 5% active chlorine - without staining or deterioration;
- Sodium chloride 170g/l diluted to 50% - without staining or deterioration.
4.5 Surface stability / resistance to scratching: Do not use abrasives on the surface.
4.6 Cleanability: Smooth, non-absorbant surfaces.
4.7 Protection against overflowing: CL 10.
4.8 Durability: Product is considered durable.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for Shower curtain 1500 mm x 2000 mm, 2 pcs
EAN 5708590170060
ETIM EC010492
HMI 42202
NBS N13:375
NRF 6311239
VVS 777471110
ETIM EC010492
HMI 42202
NBS N13:375
NRF 6311239
VVS 777471110
Item number
RT202000
Product group
Shower accessories
Product
Shower curtain 1500 mm x 2000 mm, 2 pcs
Product description
Shower curtain, 1500 mm x 2000 mm, 2 singles
Description
Shower curtain, 1500 mm x 2000 mm, 2 singles
Colour
White
Materials
Polyester cloth with zinc metal eyelet nickelfree and rust free at top, with PE reinforcement lining inside, rubber band at bottom curtain.
Dimensioned drawing, mm
Sales unit
pcs
Weight
0.79 kg
Gross weight
0.89 kg
Weight per crate
0.89 kg
Crates per pallet
200
Qty per crate
1
Qty per pallet
200
Cleaning
The product is to be cleaned with hot water or a mild soapy cleaning agent. Do not use chlorine based or corrosive cleaners as it may result in the surface being damaged.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for Soap holder
EAN 5708590333755
ETIM EC010557
HMI 88858
NRF 6311237
VVS 777564500
ETIM EC010557
HMI 88858
NRF 6311237
VVS 777564500
Item number
RT190000
Product group
Storage and accessories
Product
Soap holder
Product description
Soap holder for handrail and grab bars
Description
Soap holder for handrail and grab bars
Colour
White
Materials
Nylon (PA6)
Dimensioned drawing, mm
Sales unit
pcs
Weight
0.211 kg
Gross weight
0.331 kg
Weight per crate
3.972 kg
Crates per pallet
16
Qty per crate
12
Qty per pallet
192
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for Mirror 600 x 1000 mm with mirror fittings
EAN 5708590237442
ETIM EC010550
NBS N13:438
NRF 7501044
RSK 7972513
VVS 777553001
ETIM EC010550
NBS N13:438
NRF 7501044
RSK 7972513
VVS 777553001
Item number
RT924
Product group
Mirror and mirror holder
Product
Mirror 600 x 1000 mm with mirror fittings
Product description
Mirror 600 x 1000 mm x 5 mm, including 4 mirror fittings
Incl. mounting kit for brick wall.
Incl. mounting kit for brick wall.
Description
Mirror 600 x 1000 mm x 5 mm, including 4 mirror fittings
Incl. mounting kit for brick wall.
Incl. mounting kit for brick wall.
Materials
Mirror: Glass
Mirror fittings:
Basic material: Brass
Surface material: 912 matt chrome
Mirror fittings:
Basic material: Brass
Surface material: 912 matt chrome
Dimensioned drawing, mm
Sales unit
pcs
Weight
7.744 kg
Gross weight
9.344 kg
Weight per crate
9.344 kg
Crates per pallet
20
Qty per crate
1
Qty per pallet
20
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for Shower curtain rail, 1200 x 1200 mm
EAN 5708590169996
ETIM EC011493
HMI 42228
NBS N13:375
NRF 6311242
RSK 8207387
VVS 777271200
ETIM EC011493
HMI 42228
NBS N13:375
NRF 6311242
RSK 8207387
VVS 777271200
Item number
RT212000
Product group
Shower accessories
Product
Shower curtain rail, 1200 x 1200 mm
Product description
Shower curtain rail, 1200 mm x 1200 mm, 2x12 shower curtain rings included.
Incl. mounting kit for brick wall.
Incl. mounting kit for brick wall.
Description
Shower curtain rail, 1200 mm x 1200 mm, 2x12 shower curtain rings included.
Excl. mounting kit.
Excl. mounting kit.
Colour
White
Materials
Basic material: Aluminium
Surface material: Polyester lacquer
Cover cap: Cycoloy plastic
Rings: Polyoxymethylene plastic (POM)
Surface material: Polyester lacquer
Cover cap: Cycoloy plastic
Rings: Polyoxymethylene plastic (POM)
Dimensioned drawing, mm
Sales unit
pcs
Weight
4.239 kg
Gross weight
4.655 kg
Weight per crate
4.655 kg
Crates per pallet
55
Qty per crate
1
Qty per pallet
55
Cleaning
The product is to be cleaned with hot water or a mild soapy cleaning agent. Do not use chlorine based or corrosive cleaners as it may result in the surface being damaged.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for PLUS shower head holder
EAN 5708590169965
ETIM EC010132
HMI 42227
NBS N13:40,375
NRF 6191674
RSK 8180966
VVS 777564700
ETIM EC010132
HMI 42227
NBS N13:40,375
NRF 6191674
RSK 8180966
VVS 777564700
Item number
RT600000
Product group
Shower accessories
Product
PLUS shower head holder
Product description
Shower head holder recommended with hand rails RT118/119, RT136/138 or RT144.
Description
Shower head holder recommended with hand rails RT118/119, RT136/138 eller RT144.
Mounting instructions
Mounting material included.
Colour
White
Materials
Polycarnonate (PC) and ABS plastic
Ergonomy
Easy height adjustment with one hand or hands with little strength.
Features
For mounting on handrails with a diameter of 33 mm.
Dimensioned drawing, mm
Sales unit
pcs
Weight
0.12 kg
Gross weight
0.2 kg
Weight per crate
0.2 kg
Crates per pallet
125
Qty per crate
1
Qty per pallet
125
Cleaning
The product is to be cleaned with hot water or a mild soapy cleaning agent. Do not use chlorine based or corrosive cleaners as it may result in the surface being damaged.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for Paper holder for PLUS support arm
EAN 5708590314679
ETIM EC010553
HMI 71813
NBS N13:436
NRF 6190665
VVS 615859100
ETIM EC010553
HMI 71813
NBS N13:436
NRF 6190665
VVS 615859100
Item number
R9321
Product group
Support arms
Product
Paper holder for PLUS support arm
Product description
Paper holder, for mounting to underside of PLUS support arm.
Description
Paper holder, for mounting to underside of PLUS support arm.
Mounting instructions
Mounting material included.
Materials
Aluminium
Dimensioned drawing, mm
Sales unit
pcs
Weight
0.254 kg
Gross weight
0.26 kg
Weight per crate
0.26 kg
Qty per crate
1
Qty per pallet
0
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Shower mixer with thermostat and black operating levers easy to handle
Multiple variants
Specifications for Shower mixer with thermostat and black operating levers easy to handle
EAN 5708590211824
ETIM EC011329
HMI 35288
NBS N13:40,375
NRF 6311291
RSK 8344043
VVS 719015604
ETIM EC011329
HMI 35288
NBS N13:40,375
NRF 6311291
RSK 8344043
VVS 719015604
Item number
RT640
Product group
Shower accessories
Product
Shower mixer with thermostat and black operating levers easy to handle
Product description
Shower mixer with thermostat and black operating levers easy to handle.
VA-approved (Denmark).
VA-approved (Denmark).
Description
Shower mixer with thermostat and black operating levers easy to handle.
VA-approved (Denmark).
VA-approved (Denmark).
Materials
Basic material: brass
Protective cover: plastic
Handles: plastic
Protective cover: plastic
Handles: plastic
Ergonomy
Design and contrasting colour of the operating handles make the "wing-shaped" handles easy to see and to use.
Features
The shower mixer is heat insulated.
Can be mounted at shower mixer bracket RT760.
Can be mounted at shower mixer bracket RT760.
Dimensioned drawing, mm
Sales unit
pcs
Weight
1.73 kg
Gross weight
1.888 kg
Weight per crate
1.888 kg
Crates per pallet
100
Qty per crate
1
Qty per pallet
100
Cleaning
The product is to be cleaned with hot water or a mild soapy cleaning agent. Do not use chlorine based or corrosive cleaners as it may result in the surface being damaged.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Specifications for Shower head with 3 types of jet
EAN 5708590346830
ETIM EC010161
HMI 42226
NRF 4244987
VVS 738525640
ETIM EC010161
HMI 42226
NRF 4244987
VVS 738525640
Item number
RT613
Product group
Shower accessories
Product
Shower head with 3 types of jet
Product description
Shower head with 3 types of jet: normal, soft and massage, with 2000 mm hose
Description
Shower head with 3 types of jet: normal, soft and massage, with 2000 mm hose, chrome-look plastics
Materials
Plastic
Ergonomy
The curved shape of the handle and the weight balance between head and handle makes the shower head suitable for hands with little strength.
Features
The adjustment ring makes it easy to change the spray mode.
Sales unit
pcs
Weight
0.198 kg
Gross weight
0.304 kg
Weight per crate
0.304 kg
Crates per pallet
100
Qty per crate
1
Qty per pallet
100
Cleaning
The product is to be cleaned with hot water or a mild soapy cleaning agent. Do not use chlorine based or corrosive cleaners as it may result in the surface being damaged.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Pressalit A/S
Pressalitvej 1
DK-8680 Ry
Danmark
T +45 8788 8788
E pressalit@pressalit.com
Pressalit Pty Ltd
T 0415 425 461
E au@pressalit.com
