MATRIX supports for wash basin, fixed height

EAN 5708590329338
ETIM EC010984
GMDN 63051
HMI 106241
NBS N13:30,335
NRF 6132553
UNSPSC 42211600
VVS 636858800

R2010182

31/12/2023

Wash basin brackets

MATRIX supports for wash basin, fixed height

MATRIX supports are the low cost solution for MATRIX MEDIUM and ANGLE wash basins.
They are available in a fixed height version and a manually height adjustable version, which is suitable for infrequent adjustment.

Supports for fixed height installation, pair of. Suitable for MEDIUM and ANGLE wash basins with integrated handrails.
Excl. mounting kit.

Excl. mounting kit. See Technical datasheet (pdf) for information on mounting kits suitable for various wall types.

Pale grey

A wash basin bracket is intended for optimum ergonomics at a wash basin, for both seated and standing users with disabilities.
Expected service life is 10 years, provided that maintenance is carried out as described in the user manual.

Powder coated stainless steel

Maximum load: 150 kg.
Suitable for wash basins weighing no more than 30 kg.
When the wash basin is loaded with 150 kg, each wall fastener will be carrying 75 kg.
Wash basin brackets need to be able to carry the weight of the wash basin, as well as support the weight of the person who is leaning against the wash basin or who is using the wash basin to rise from seated position.
Neither wash basin nor wash basin bracket are intended to carry the full body weight of a person, and the test methods applicable to wash basin brackets reflect this: ISO 17966 prescribes a static test on the front edge of the wash basin at 75% of maximum user weight, i.e. when the maximum load on a wash basin bracket is given as 150 kg and the wash basin weighs 30 kg, it is – according to ISO 17966 – the equivalent of a user weighing 160 kg leaning on the front edge of the wash basin.

Fixed mounting

160 kg

150 kg

pcs

2.5 kg

3 kg

3 kg

1

0

VALUE & MATRIX wash basin brackets.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use corrosive or abrasive cleaners as it may result in the surface being damaged.
For surface disinfection, chlorine-based disinfectants may be used according to the product specification and safety precautions for these products.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+
Klorilli

NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

CE UK MDR This product is in compliance with all relevant requirements of:
- Regulation (EU) 2017/745 on medical devices.
For the UK: - Medical Device Regulation (MDR) 2002 on medical devices.

Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.