VALUE II support arm, fixed height

EAN 5708590367576
ETIM EC010078
GMDN 35585
HMI 123560
NRF 6191057
RSK 8487434
UNSPSC 42211612
VVS 615891100

R1109000

Support arms and arm supports

VALUE II support arm, fixed height

VALUE II support arm, fixed, foldable, projection 850 mm.
The ergonomic design gives a secure and comfortable grip as well as a good sense of where the support arm ends.
Incl. fixing bolts for brick wall. Plugs depend on wall type and must be ordered separately.

VALUE II support arm, fixed, foldable, projection 850 mm.
The ergonomic design gives a secure and comfortable grip as well as a good sense of where the support arm ends.
Materials: Rilsan-coated steel, pressure-cast aluminium, plastic.
Incl. fixing bolts for brick wall. Plugs depend on wall type and must be ordered separately.

Incl. mounting bolts for brick wall. Plugs depend on wall type and must be ordered separately.

White

The support arm is used as a suport for a user, when he or she sits down or gets up from a toilet.
Expected service life is 10 years, provided that maintenance is carried out as described in the user manual.

The support arm is manufactured from steel with a Rilsan coating, which is comfortable to the touch, easy to clean, and protects the metal against corrosion.

Provides firm support when you are sitting, standing, or transferring to and from a toilet.

Good, broad support surface for the hand and arm.
The ergonomic form gives a firm and comfortable grip.

The support arm can fold up when not in use or to make more space.

Maximum load: 120 kg.
When the support arm is loaded with 120 kg, each wall fastener is loaded with 242 kg.

Fixed mounting

120 kg

120 kg

pcs

2.62 kg

3.122 kg

3.122 kg

45

1

45

VALUE support arms.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use corrosive or abrasive cleaners as it may result in the surface being damaged.
For surface disinfection, chlorine-based disinfectants may be used according to the product specification and safety precautions for these products.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+
Klorilli

NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

CE MDR This product is in compliance with all relevant requirements of: - Regulation (EU) 2017/745 on medical devices.

Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.