SELECT wash basin bracket, wall-mounted with floor support, electrically height adjustable with lever control
Can be height adjusted 300 mm from 670 to 970 mm. For MATRIX SMALL and CURVE/CURVE ll wash basins
Concealed plumbing - hygienic Suits variety of basins Choice of operating control and cover colours
Electrically height adjustable 300 mm with lever control.
Recommendation: flexible feed/waste system R2065 (UK market R2075).
Incl. fixing bolts for wash basin (Recommended with MATRIX SMALL and MATRIX CURVE/NEW CURVE wash basins).
Materials: Anodized aluminium and polystyrene (PS).
Excl. mounting kit.
The wash basin can be adjusted 300 mm – from 670 to 970 mm above the floor.
Suitable for wash basins that weigh 16-22 kg.
When the wash basin is loaded with 150 kg, each wall fastener will be carrying 18 kg.
Wash basin brackets need to be able to carry the weight of the wash basin, as well as support the weight of the person who is leaning against the wash basin or who is using the wash basin to rise from seated position.
Neither wash basin nor wash basin brackets are intended to carry a person, and the test methods applicable to wash basin brackets reflect this: ISO 17966 prescribes a static test on the front edge of the wash basin at 75% of maximum user weight, i.e. when the maximum load on a wash basin bracket is given as 150 kg and the wash basin weighs 20 kg, it is – according to ISO 17966 – the equivalent of a user weighing 173 kg leaning on the front edge of the wash basin.
PLUS & SELECT wash basin brackets.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
Suma Star free D1
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.